Phase 1 of the local-DNS-name work. Users type a name, not a port.
- dnsmasq quadlet on dankclaw (rootless, slirp4netns, port 53 published):
serves the flat name scheme from addn-hosts, upstream 1.1.1.1/1.0.0.1.
Image built from the in-repo Containerfile (localhost/dnsmasq:latest).
- Caddyfiles (both hosts): all *.dankclaw.local / *.dankserver.local vhosts
renamed to flat <service>.franksdank.cloud. Explicit http:// site
addresses for now; TLS (wildcard LE via DNS-01/Porkbun) lands in phase 2.
- Drift reconciliation (live /etc/caddy/Caddyfile on dankserver differs
from the repo): added the live-only llms.franksdank.cloud vhost
(OpenWebUI on :3000). Dropped the legacy search vhost from dankserver
(the name belongs to dankclaw's gluetun-routed SearXNG; the legacy
instance stays reachable at 192.168.0.235:8081).
- Homepage service links updated to the new names.
- New test seams (TDD): tests/dnsmasq.bats (quadlet boot-persistence,
port 53, conf/record validity, Caddyfile<->addn-hosts cross-check on
the right host IPs); caddyfile.bats naming-convention tests updated.
LAN clients get this DNS from the SURFboard G36 (DNS Relay -> statically
configured -> 192.168.0.143); the router change is a pending user step.
Real tokens live only in the host .env files (git-ignored):
- /home/dank/serverAppConfigs/dankclaw/.env
- /home/dank/serverAppConfigs/dankserver/.env
Token is scoped to the franksdank.cloud zone (DNS read/write).
Add a hermes-dashboard compose service that runs 'hermes dashboard' on
0.0.0.0:9119 with HTTP basic auth. The username + scrypt password hash
live in the git-ignored /home/dank/hermes-data config (plaintext never
stored). A separate container from the Signal gateway, since the gateway
entrypoint does not start the dashboard. Both share the data volume and
are boot-persistent. Docs page + index link added (docs-first contract).
The slirp host.containers.internal mapping (169.254.1.2) went down at
runtime, so the Signal adapter could not reach the signal-cli daemon.
The host LAN IP (192.168.0.143:8080) is the stable container->host path
and is reachable from the container. Switch SIGNAL_HTTP_URL to it.
'hermes gateway run' starts the messaging gateway (Signal SSE), not the :8090
web dashboard, so probing 8090 always reported unhealthy. The container's
running state plus the daemon's SSE connection are the real health signal.
The image's default s6 entrypoint launches the interactive TUI, which exits
without a TTY and crash-loops the container. Override the entrypoint to run
'hermes gateway run --force' (the documented Docker mode) and point HERMES_HOME
at the mounted data dir so the Signal platform config + state persist. The
Signal platform is enabled in config.yaml (platforms.signal.enabled).
The hermes container reaches the host signal-cli daemon via podman's
host.containers.internal alias (127.0.0.1 in the container is not the host).
SIGNAL_ACCOUNT/SIGNAL_ALLOWED_USERS come from the git-ignored .env (the phone
number is personal, not committed). Move the data volume to a dank-owned path
(/opt is root-owned and not writable by the run user).
ComfyUI-Manager (V3.41) is installed in the mounted custom_nodes dir and
self-installs its pip deps on start. Document the install command, the
bind-mount-shadows-image gotcha, and the /manager/version health check.
Rewrite ComfyUI.md to match reality: comfyui-rocm:gfx1151 built from
Containerfile.comfyui on AMD's gfx1151 base, device passthrough, video group
only (render is unmappable in rootless), data under /home/dank/comfyui-data,
boot-persistent via a user systemd unit. Mark research 'way 1' as applied and
update the repo-consequence section (the CPU config is no longer the default).
/opt is root-owned and not writable by the run user. Point the model/input/
output/custom_nodes mounts at a dank-owned path so the container can write
them without sudo. The tests do not assert volume paths, so this is a no-op
for the suite.
Rootless podman cannot map the 'render' gid (990) into the container
namespace (dank's subgid range is 100000+), so --group-add render fails to
start the container. GPU access actually comes from the /dev/kfd + /dev/dri
passthrough, checked host-side (the run user is already in 'render' on the
host). So add only the 'video' group (which resolves) and drop 'render'.
Update the group test to assert video present and render ABSENT (with the
rootless rationale), per the approved rootless config.
Replace the CPU stock image with a container built from
Containerfile.comfyui on AMD's gfx1151-tagged vLLM base — the only torch
build verified to report torch.cuda.is_available()=True on the Strix Halo
APU (Radeon 8060S, capability (11,5)).
- Containerfile bakes the ComfyUI code in and installs its deps, but skips
the torch family (the base image already ships the gfx1151 ROCm
torch/torchvision/torchaudio; an unpinned 'torch' in requirements.txt would
clobber the gfx1151 kernels).
- compose comfyui service: build + image comfyui-rocm:gfx1151, passes
/dev/kfd + /dev/dri, adds video+render groups, drops --cpu. Models/data
persist under /opt/comfyui.
- Un-skip the four compose-wiring acceptance tests (the gate for this work).
The JSON rate cap (API_MAX=4/hour) is hardcoded in Python, not settable in
limiter.toml; pass_ip is the only bypass. Rootless podman strips the client IP
on published-port hits (the container sees a slirp source), so local subagents
must present a pass_ip source. Document the slirp IP-strip, the pass_ip
expansion, and the root-owned config file (one-off sudo cp to update).
Root cause of the 429s: the ip_limit rate limiter caps JSON (format!=html)
requests at API_MAX=4 per IP per hour, and that constant is hardcoded in
Python (searx/botdetection/ip_limit.py), not settable in limiter.toml. The
only bypass is pass_ip (filter_request returns before ip_limit runs).
Rootless podman strips the client IP on published-port hits, so the container
sees a slirp/bridge source (10.88.x/10.89.x), never the real client - hence
even a LAN-IP curl 429'd on /search. Expand pass_ip to loopback + the host's
private podman/slirp ranges (plus the existing LAN) so local subagents present
a trusted source and skip the rate limit entirely. All these ranges are
reachable only from the host or LAN, never the internet.
Replace the dead dankserver open-webui (bare container, :3000, pointed at a
dead :9090 backend) with a boot-persistent quadlet on dankclaw:
- CPU image (:main); dankclaw is CPU-only, so the :cuda image is wasted.
- Isolated on slirp4netns; publishes 3005 (3000 is Gitea's HTTP port).
- Default LLM backend is the local vLLM on 52625 (frank-default-large).
- Data persists under /home/dank/Containers/open-webui/data.
- Caddy route now proxies to the published LAN port (the container is not on
Caddy's network).
Also corrects the model/port mapping in the docs: the live state (verified
2026-08-19) is frank-default-large on vLLM :52625 (dankclaw) and
frank-default-small on llama.cpp :7770 (dankserver) — the reverse of the
2026-08-17 note.
Quadlet units are generator-managed; systemctl enable fails on them
('transient or generated'). The [Install] WantedBy=default.target in each
.container file is itself the enablement (is-enabled reports 'generated'), and
with user linger on they start at boot. Drop the enable step; daemon-reload and
start are enough.
Device= in [Container] is a [Volume]-group key; the container device key is
AddDevice= (maps to podman --device). Update the /dev/net/tun device line and
the test seam.
The podman quadlet generator fails with "unsupported key 'CapAdd' in group
'Container'" and skips the whole unit. The correct key is AddCapability=
(maps to podman --cap-add). Update the gluetun unit and its test seam.
The quadlet .network unit is generator-managed and cannot be enabled; it is
pulled in automatically by the containers that set Wants=/After=searxng-network.
Enable only the three container units. The explicit start of the network is kept
(start works on generated units).
Update SearXNG, Gluetun, and Valkey to describe the quadlet units instead of
compose: searxng sets Network=gluetun.container, the units install to
~/.config/containers/systemd/, and scripts/deploy-searxng-quadlet.sh deploys
them. Add a Boot Persistence section to the Stack doc. Correct the Gluetun
tunnel check (the :8000 server 404s; verify tun0 instead) and note the pinned
10.89.2.0/24 subnet.
Remove gluetun/searxng/valkey from dankclaw/compose.yaml (they are now
quadlet units) so podman-compose up can no longer fight them for the netns and
port 8081. Add scripts/deploy-searxng-quadlet.sh: an idempotent installer that
copies the units to ~/.config/containers/systemd/, daemon-reloads, enables them
for boot, and starts them in dependency order. Safe to run on first migration
and on every later change.
Converts the podman-compose SearXNG stack to boot-persistent quadlet units so
it survives a reboot (the compose deployment did not). searxng sets
Network=gluetun.container, which makes it reuse gluetun's network namespace so
outbound search traffic exits the WireGuard tunnel; it publishes no port of its
own (the port lives on gluetun). gluetun and valkey join a pinned searxng
network (10.89.2.0/24, DNS-enabled) so searxng reaches valkey by name.
Secrets stay in /opt/searxng/.env (mode 0600), referenced via [Service]
EnvironmentFile= so ${VAR} expands. Adds a bats seam asserting the netns
wiring, port placement, boot install, and that no secret material is tracked.
The :8000 status server 404s on every path and the image has no curl, so the
prior healthchecks could not pass. Check /sys/class/net/tun0 instead: it exists
only while the WireGuard tunnel is connected, so the healthcheck reflects real
VPN state.
The gluetun image ships wget, not curl, and its status server answers 200 at
/ on port 8000 (not /health). The old curl-based healthcheck always failed, so
the container read 'unhealthy' even with a working tunnel. Use wget against /.
A direct hit on the published port has no X-Forwarded-For header, so the
bot-detection cannot resolve a client and returns 429. SearXNG must be
reached through Caddy (search.dankclaw.local), which sets X-Forwarded-For.
Add the podman bridge subnets to trusted_proxies so Caddy's source is
trusted for XFF extraction; note the CIDR is dynamic and should be pinned.
Verified agentic JSON search returns 26-31 relevant results via this path.
The host has no unqualified-search registries in registries.conf, so the
short names qmcgaw/gluetun and valkey/valkey did not resolve and the pull
hung. Qualify them with docker.io/ so the pull works on any host.
The compose only forwarded VPN_SERVICE_PROVIDER, VPN_TYPE and the private
key, so Gluetun could not form a tunnel. Forward the peer public key,
endpoint IP/port, addresses, allowed IPs and keepalive interval. Add
matching placeholders to .env.example (current Gluetun uses the
single-peer WIREGUARD_* model, not the old WIREGUARD_PEERS_* names).
The compose still runs ComfyUI with --cpu (the gfx1151 torch image is not
built yet), so the four compose-wiring ROCm tests fail. Skip them with a
pending note; the Containerfile test stays active. Re-enable when the GPU
migration is applied.
The trusted group lives in limiter.toml, not settings.yml. Add
shared/searxng/limiter.toml trusting 192.168.0.0/24 in pass_ip and
trusted_proxies, copy it into /opt/searxng/config on deploy, and correct
the SearXNG doc. New test seam: tests/searxng_limiter.bats.
- README: fix broken 'Also See' placeholder URL -> live Gitea LAN URL
- index.md: expand vllmScripts See Also with the endpoints it serves
- OpenWebUI.md: :7770 backend is the llama.cpp PP head (split to the
3090), managed by vllmScripts; note the FLM NPU :52625 alternative;
fix the broken [[llama.cpp Server]] wikilink
- Gitea.md: hosted repositories table (both projects)
- Dankclaw Stack.md: host-level LLM endpoints in the service inventory
- AGENTS.md: runtime note — LLM endpoints live in vllmScripts, not here
Pre-existing failures (untracked ComfyUI WIP): tests 6, 8, 9, 10.
Docs seams green: ok 19 (compose service docs), ok 20 (index links).
unattended-upgrades rebooted dankclaw at 15:01; the legacy
podman-compose gitea stack had no systemd units, so rootless podman
did not auto-start the containers. Gitea was down ~1 hour.
- add quadlet units (dankclaw/gitea/quadlet/): gitea-postgres,
gitea-server, gitea-caddy + gitea.network (DNS enabled; the default
rootless podman network has dns_enabled=false)
- add gitea stack Caddyfile (upstream gitea-server:3000) and
.env.example; live password stays in /opt/gitea/.env (0600)
- fix latent name bugs in main stack config: DATABASE_HOST
gitea-postgres, Caddyfile upstream gitea-server
- docs: rewrite Gitea page for the quadlet stack (management, boot
persistence, secrets, gotchas, incident log); fix port 3000 in
stack table; Postgres connection notes
- legacy compose retired on target to /opt/gitea/.deprecated/
Live-verified on Dankclaw 2026-08-14:
- official rocm/comfyui image is built PYTORCH_ROCM_ARCH=gfx942;gfx950
(datacenter only) -> torch.cuda.is_available() False on gfx1151
- AMD gfx1151-tagged PyTorch build (rocm/vllm:...gfx1151...pytorch_2.9.1)
-> avail True, Radeon 8060S, cap (11,5); needs /dev/kfd + /dev/dri
- torch.backends.vulkan is compiled out of standard wheels; no ComfyUI
--vulkan flag exists; Vulkan is a dead end for ComfyUI
- Lemonade Server does image gen via wrapped stable-diffusion.cpp, whose
HIP kernels include gfx1151 -> works where ComfyUI's torch cannot
New pages: ComfyUI ROCm and Vulkan, Lemonade and sd.cpp; ComfyUI.md
qualified; compose stays --cpu until a gfx1151-enabled torch image is built
Frank