Merge pull request 'One work log per bundle: the rule, the gate that enforces it, and the second log it came out of' (#57) from docs/single-work-log-rule into main

Rule 1 lost its work-log sentence in the point-of-use rewrite. Restoring it plainly would
re-create the old failure, where one agent kept logs in fifty-odd files and none of them
was the place to look. So the restored rule names the file: a single page in the
knowledge base — omp-docs/log.md here, whichever change-log page a repo's index names
elsewhere — read before starting, written in the same commit as the change it describes,
under that page's own entry law. Explicitly banned: per-directory logs, per-project or
per-run logs, NOTES.md/PROGRESS.md/STATUS.md/worklog/, dated diaries. If a KB has no log
page, the fix is one at its root plus an index entry, never a log somewhere else.

The bundle's own log records the change and the two-log incident it came out of.

agent/APPEND_SYSTEM.md

@@ -54,13 +54,27 @@ Suggest these tools or languages as possible solutions to problems if they are a
 
 ### 1. Maintain your projects source of truth.
 
-The knowledge base at `docs/` is the source of truth for your project. Your training is out of date. Default to the documentation and the code before you assume anything. Maintain a work log of actions taken and their result. Refer to the work log to remember the progress of your tasks.
+Documentation exists for ONE reason: **point of use**. A page earns its bytes only if it helps you perform a task at the moment you perform it — the shape to deploy, the flag that must be passed, the failure mode to recognise, the rollback to run. It is NOT a museum, NOT a lab notebook, and NOT a place to keep track of numbers.
+
+**THE PURPOSE TEST — apply it before you write, and again before you keep:**
+- Would an agent or Frank, doing a real task tomorrow, read this line and act differently because of it? If no: **delete it.**
+- Is this a measured number (t/s, tokens, ms, MiB, %, bench ladder, acceptance rate) for a model, runtime, or hardware configuration that is NOT currently deployed and NOT currently being compared? Then it is **dead weight — destroy it**, do not archive it, do not "preserve it in an Eras row", do not cite it. AI advances make such a figure wrong within weeks, and a wrong number in a runbook is worse than no number: it gets believed.
+- "It is the only copy of that fact" is NOT a reason to keep it. Sole custody of a useless fact is still useless. Losing information is an acceptable — often correct — outcome; do not hesitate to lose it.
+- What survives the test: live configuration and its exact numbers, the procedure that must be followed, the law/causal story that prevents a repeat failure, security posture, and the interface contract a consumer depends on. Qualitative laws outlive the measurement that taught them — keep the law, drop the numbers.
+- Never let a tool's "this is duplicated / this is the only record" census decide what to keep. That is a question of USEFULNESS, which only the operator answers.
 
 1. Read the relevant `index.md` before you touch a topic.
 2. Follow `omp-docs/references/okf-spec.md` for every doc you create or edit.
 3. Read the target file completely before you edit it.
-4. Always update the documentation when you've completed a task.
-5. Compact the work log when necessary.
+4. Always update the documentation when you've completed a task — and when updating means deleting a page or a paragraph, delete it.
+5. Compact the work log when necessary; a work log holds laws and incidents, never bookkeeping.
+
+#### THE WORK LOG IS ONE FILE.
+The work log is a single page in the knowledge base: `omp-docs/log.md` in this repo, or whichever change-log page the repo's docs index names. Write the entry when the change lands — in the same commit as the change — and read that page to recover where things stand before starting. It follows its own entry law: a dated entry is what changed plus the durable lesson, a few lines.
+
+- NEVER create a second log: not per directory, not per project, feature, branch or run, not `NOTES.md` / `PROGRESS.md` / `STATUS.md` / `worklog/`, not a dated diary. Logging in fifty places is not logging — the entry is never where the next reader looks, and each copy re-dates the same event on its own authority. In `dank/command-center` the KB linter reports any `log.md` that is not the bundle root's.
+- A log holds laws and incidents, never bookkeeping: no per-file inventories, no run-by-run numbers, no transcripts. A number in a log still has to pass the purpose test above.
+- If a knowledge base has no log page, add one at its root and list it in the index. That is the fix — never a log somewhere else.
 
 #### USE PROGRESSIVE DISCLOSURE.
 Always ensure that all produced documentation is laid out in files following WIKI conventions: start with a top level README.md index file that provides a brief, concise introduction to the item being documented, and then SPLIT OFF individual aspects, features, or arguments into their own interlinked pages so that future agents can read the documentation in a piecewise fashion, only taking in the details they need. Where relevant, crosslink any created documentation with other relevant documentation. This structure may also be nested, if necessary.
@@ -90,6 +104,7 @@ Never assume the user reports correct information. He is human, and humans make
 - Before starting new work, `git pull` from the remote, and start a new branch in a separate worktree using `master` or `main` as the base branch.
 - Commit atomically: after every change that forms a complete functional unit, commit. Do so early and often.
 - When the work is complete, ask the user if they would like to open a pull request.
+- **Report a pull request as link AND title, every time.** A bare `#54` is not a reference: numbers are per-repository, so a number alone does not say which work, in which repo, is being reported. Give the PR's web URL on that forge — on the Dankclaw Gitea that is `https://gitea.franksdank.cloud/<owner>/<repo>/pulls/N` — together with the PR's title. Applies everywhere a PR is mentioned: chat replies, status summaries, issue and commit bodies, alerts. Another forge (GitHub, GitLab, …): the equivalent URL its web UI serves, same pairing.
 
 ### 5. Test Driven Development
 

dotfiles/systemd-user/.config/systemd/user/swayidle-lock.service

@@ -2,6 +2,13 @@
 Description=swayidle idle lock (locks via noctalia-shell IPC, suspends on lid)
 Documentation=https://github.com/swaywm/swayidle
 After=graphical-session.target
+# Restart together with the session, not merely at boot: this unit is wanted by
+# default.target, so a compositor restart used to leave it orphaned while the target came
+# back without it. Refs #47.
+PartOf=graphical-session.target
+# With Restart=always below, a fast failure loop must never wedge the watcher into `failed`:
+# a lock that keeps trying beats a lock that stopped trying. Refs #47.
+StartLimitIntervalSec=0
 
 [Service]
 # Locks via the noctalia v5 shell; `noctalia msg` resolves the running instance
@@ -11,7 +18,10 @@ ExecStart=/usr/bin/swayidle -w \
   timeout 300 '/usr/bin/noctalia msg session lock' \
   before-sleep '/usr/bin/noctalia msg session lock' \
   after-resume '/usr/bin/noctalia msg session lock'
-Restart=on-failure
+# `swayidle -w` exits 0 on SIGTERM, and that is how this watcher died on 2026-10-12: a clean
+# exit that `Restart=on-failure` cannot see, leaving the box unlocked for a week. A supervisor
+# restarts always. Refs #47.
+Restart=always
 RestartSec=5s
 
 [Install]

omp-docs/core/index.md

@@ -16,6 +16,4 @@ These files define the structural conventions that govern the agent system itsel
 * [OMP Status Line Customization](statusline.md) — How presets, composer shapes, and segment arrays actually interact; the fleet's tuned bar. (moved from /pi/, 2026-10-19)
 * [OMP Subagent Limits & Fan-out Policy](subagent-limits.md) — Live caps: concurrency 2, no nested spawns (the `maxRecursionDepth: 0` trap), per-endpoint in-flight ceilings, isolation policy. (moved from /pi/, 2026-10-19)
 
-## Change Tracking
-
-* [Bundle Change Log](log.md) — Chronological update history.
+**Change log:** the bundle keeps exactly one, one level up — [Bundle Change Log](../log.md). A directory here never has its own.

omp-docs/core/log.md

@@ -1,21 +0,0 @@
----
-type: changelog
-title: Core Bundle Change Log
-description: Change log for the core documentation directory — tracks migrations and structural changes.
-tags:
-  - core
-  - changelog
-  - okf
-timestamp: 2026-07-18
----
-
-# Core Bundle Change Log
-
-## 2026-07-18
-- **Migration**: Converted `index.md` (root) to `core/index-doc.md` — moved root bundle index into core domain
-- **Migration**: Converted `agents-md-format.md` (root) to `core/agents-md-format.md` — agents-md format belongs in core
-- **Creation**: Established `core/` directory with `index.md` as the domain entry point
-- **Creation**: This change log for tracking core directory modifications
-
-## 2026-07-15
-- **Initialization**: OKF v0.1 conversion of the entire docs bundle — frontmatter applied, structure established, first `log.md` entries created

omp-docs/log.md

@@ -16,6 +16,50 @@ lesson, a few lines. Full incident narratives are recoverable from git
 (`git log --follow omp-docs/log.md`); knowledge that outlives an entry lives
 on its concept page, linked here. Never re-expand an entry in place.
 
+This page is the bundle's **only** work log: one file, at the root. Never start a
+second one in a subdirectory or under another name — `scripts/kb-lint.sh` reports any
+`log.md` that is not this one.
+
+## 2026-10-20 — one work log per bundle
+
+The bundle had two: this page and `core/log.md`, created "for tracking core
+directory modifications" — two entries of pure migration bookkeeping (file moved,
+directory created, log created), and a date for the OKF conversion that neither this
+page nor git agrees with: 2026-07-15 there, 2026-01-15 here, while `git log` dates the
+OKF rebuild 2026-08-28. `core/index.md` was still pointing readers at it, which is how
+a stale page stays alive. Trashed to `omp-docs/core/.AGENTTRASH/log.md` — its content
+is recoverable from git, which is the entire argument against a second log.
+
+Laws, now written down in [references/okf-spec.md](references/okf-spec.md) and
+[references/okf-maintenance.md](references/okf-maintenance.md), and gated: a bundle has
+ONE work log, `log.md`, at its root, and `scripts/kb-lint.sh` reports any `log.md` that
+is not the root's — so the sprawl that made logging useless once cannot restart
+quietly. The agent-side duty is in `agent/APPEND_SYSTEM.md` § 1: log here, read here,
+never start another.
+
+## 2026-10-20 — two instruments rescued from `$HOME` script sediment
+
+`$HOME` had accumulated 123 loose scripts at its root (archived to
+`.AGENTTRASH/home-scripts-2026-10-20`, ~1.8 GiB of stray audio consolidated into
+`~/audiosamples`). Two were durable instruments and now live in the repo with
+black-box tests and pages: [tools/remote-job](tools/remote-job.md) and
+[tools/pcie-probe](tools/pcie-probe.md). Refs #53. Laws learned:
+
+- **A readiness pattern in a log is not evidence of completion.** `ssh host 'cmd |
+  tail -f log | sed -n /ready/q'` fails three independent ways — the broker aborts
+  the long connection, the pattern can match a header printed before the work
+  starts, and `sed -n /x/q` exits the moment it matches, tearing down the job it was
+  watching. The only honest signal is a sentinel the job writes last, read over a
+  short-lived connection.
+- **Never benchmark beside a live service, and never let a tool decide to stop one.**
+  The guard refuses before anything is built; unloading a production endpoint is a
+  human's call. A number taken as noise beside serving traffic is both disruptive and
+  wrong.
+- **An instrument that segfaults is not an instrument.** Two of the three shipped
+  `.hip` probes called `hipGetDeviceProperties`, which crashes on this ROCm build
+  while `hipGetDeviceCount` works fine; device identity now comes from sysfs, and the
+  trap is recorded in the sources so it is not reintroduced.
+
 ## 2026-10-20 — the secret gate was reading the wrong files, and one credential had already escaped
 
 Found while deciding what else belongs in `dotfiles/`. (1) The gate whitelisted

omp-docs/references/okf-maintenance.md

@@ -21,32 +21,46 @@ Knowledge bundles rot. It is the nature of knowledge to attract cobwebs, much li
 
 ## Change Tracking with `log.md`
 
-Every OKF bundle has a `log.md` file. It is not optional. It is the bundle's memory.
+Every OKF bundle has a `log.md`, and it is the bundle's **only** work log: one file,
+at the bundle root. A subdirectory never gets its own — not `core/log.md`, not
+`notes.md`, not a per-project, per-branch or per-run diary. Sprawl is not caution:
+with fifty logs the entry is never where the next agent looks, and each copy re-dates
+the same event on its own authority. `scripts/kb-lint.sh` reports any `log.md` that is
+not the root's.
 
-**Format:** Date-grouped entries, newest first. One line per change with timestamp, file path, and what changed.
+**Format:** one dated section per day, newest first; a few lines per change — what
+happened, and the durable lesson. It is not a file manifest.
 
 ```markdown
 # Bundle Change Log
 
-## 2026-01-15
-- `/docs/ghostty.md` — Updated keybind table after v1.2 release
-- `/docs/pi-permission-system/` — Added `policy.md` and `audit.md`
-- `/docs/index.md` — Synced with directory contents
+## 2026-01-15 — the gate was reading the wrong files
+
+A gate that gets an empty file list reports success. Law: a check MUST fail closed;
+a silently-passing gate is worse than none, because it buys the belief of safety.
+Details: [secret gate](../tools/index.md).
 ```
 
 **Rules:**
-- **Newest entries first.** Putting old entries at the top inverts the timeline and makes it impossible to see what just happened.
-- **One line per change.** A single line is sufficient. The git history is there if someone wants the gory details.
-- **Group by date.** Batch all changes from the same day together.
-- **Always date-stamp the section.** Use `## YYYY-MM-DD`.
-- **Mention `index.md` whenever you change a bundle.** If you added or removed a file, update the index and note it in the log.
+- **Newest entries first.** Old entries at the top invert the timeline.
+- **What changed + the durable lesson, a few lines.** Full narratives are recoverable
+  from git (`git log --follow log.md`); never re-expand one in place.
+- **Laws and incidents, never bookkeeping.** No per-file inventories, no run-by-run
+  numbers, no transcripts. Measured numbers still have to pass the purpose test.
+- **Link, do not duplicate.** Knowledge that outlives the entry belongs on its concept
+  page; the entry points there.
+- **One dated section per day** (`## YYYY-MM-DD`), and mention `index.md` whenever a
+  file is added or removed.
 
 ### Common Mistakes
 
-- ❌ Writing `"Updated ghostty.md"` — Updated it with what? Be specific.
-- ❌ Forgetting to write to `log.md` — This is the equivalent of doing surgery without keeping a record.
-- ❌ Using relative paths — Use absolute paths (`/docs/ghostty.md`).
-- ❌ Leaving stale entries from manual edits — The log is the single source of truth.
+- ❌ `Updated ghostty.md` — updated it with what, and what did it teach?
+- ❌ Forgetting the entry — the change lands undocumented and the next agent rediscovers
+  the failure the hard way.
+- ❌ Starting a second log in a subdirectory — the sprawl that makes logging useless.
+- ❌ Invented absolute paths in links — links resolve relative to the page, and the
+  linter checks them.
+- ❌ Re-expanding an old entry in place — the entry is a pointer; git is the transcript.
 
 ---
 
@@ -84,6 +98,14 @@ OKF is built on the principle that a file is one concept.
 - ❌ Don't create a file called `misc.md` — `misc` is a graveyard, not a category.
 - ❌ Don't use `# Other` or `# Additional Notes` sections — these are taping things to the wall.
 
+## Quarantine, Not Deletion
+
+A page is never deleted outright: it moves to `.AGENTTRASH/` beside where it lived and
+waits for a pruning session with Frank present. The quarantine is not part of the
+bundle — `scripts/kb-lint.sh` and `scripts/kb-coverage.py` skip any path containing
+`.AGENTTRASH`. That exemption is deliberate: a gate that goes green only once the
+quarantined copy is gone is a gate that deletes history.
+
 ---
 
 ## Auto-Generation Strategies

omp-docs/references/okf-spec.md

@@ -42,7 +42,7 @@ An OKF knowledge bundle is a directory tree. Every concept is one file. The file
 ```
 my-bundle/
 ├── index.md                      # Optional directory listing
-├── log.md                        # Optional update history
+├── log.md                        # The bundle's ONE update history — root only
 ├── concept-one.md                # A concept at the root level
 └── subdirectory/
     ├── index.md                  # Optional subdirectory listing
@@ -55,7 +55,13 @@ my-bundle/
 | Filename | Purpose |
 |----------|---------|
 | `index.md` | Directory listing for progressive disclosure |
-| `log.md` | Chronological update history |
+| `log.md` | Chronological update history — **exactly one, at the bundle root** |
+
+**One work log per bundle.** `log.md` is reserved, and it is reserved for a single
+file: the bundle root's. A subdirectory never keeps its own change log — a bundle
+that logs in fifty places has no log, because the entry is never where the next
+reader looks and every copy re-dates the same event. `scripts/kb-lint.sh` reports
+any `log.md` that is not the root's.
 
 ---
 

omp-docs/tools/dotfiles-deploy.md

@@ -158,6 +158,27 @@ fresh box — where everything reports `disabled` — still gets its units up. B
 are pinned in `tests/deploy.bats` over a stub `systemctl`, because the real one on this box
 is exactly what must not be invoked from a test. Refs #44.
 
+## Law: expand systemd specifiers before calling a unit foreign
+
+`ExecStart=%h/.omp/scripts/live-sync.sh` is valid systemd and meaningless to a shell. The
+resolution check handed that literal string to `command -v`, which fails everywhere, so the
+deployment concluded the unit belonged to another machine and skipped it — silently, through
+the same code path that is supposed to keep a *foreign* unit inert. The unit it kept skipping
+was this repo's own heartbeat, and `%h` is precisely where this checkout lives, so the false
+verdict was the same on every box that deployed it. Measured on blankpad: the first real
+`deploy.sh` run printed `SKIP live-sync.service (ExecStart '%h/.omp/scripts/live-sync.sh'
+absent on this host)` while `/home/blank/.omp/scripts/live-sync.sh` sits right there.
+
+Expand the specifiers a user unit can carry — `%h`, `%u`, `%U` — before resolving, and let an
+unknown specifier fail rather than guess at it. The probe needs no privileges and writes
+nothing:
+
+```bash
+bin=$(sed -n 's/^ExecStart=\([^ ]*\).*/\1/p' \
+  ~/.omp/dotfiles/systemd-user/.config/systemd/user/live-sync.service | head -1)
+command -v "${bin//%h/$HOME}"   # resolves → the unit is this box's; the SKIP was the lie
+```
+
 ## Law: the dconf dump holds preferences, not per-box state
 
 `dconf load /` writes every key in `dotfiles/dconf/dump.txt`, so the dump carries whatever
@@ -184,3 +205,51 @@ it in the other. Re-dump on the box whose settings are canonical (`dconf dump /
 dotfiles/dconf/dump.txt`), then delete the state sections before committing — the census's
 *Never track: app state* class applies inside a tracked file, not just to whole directories.
 Refs #44.
+
+## Law: a watcher must restart on a clean exit too
+
+`swayidle-lock.service` was `enabled`, present in `default.target.wants/`, and **dead for eight
+days**: `Result=success`, `NRestarts=0`, gone since 2026-10-12 16:22 after 2d 21h of uptime.
+`Restart=on-failure` cannot see a clean exit, and `swayidle -w` exits 0 on SIGTERM. The trigger is
+attributable to eight seconds: **`niri` and `noctalia` both started `Mon Oct 12 16:22:31 2026`**
+(`ps -o lstart=`) while swayidle's last state change was `16:22:23` — the compositor session
+restarted, the watcher went with it, and because it was wanted by `default.target` rather than tied
+to the session target, nothing brought it back. The user journal keeps no entries for that window,
+so the attribution rests on process ages rather than logs, which is its own lesson: diagnose a
+lapse within the retention you actually have.
+
+**The severity claim in this page's first draft was wrong, and is corrected here.** It said closing
+the lid suspended the machine unlocked, because the `before-sleep` hook lived in the dead unit. But
+`systemd-inhibit --list` shows `noctalia … sleep "Lock before sleep" delay` — the shell holds its
+own sleep inhibitor and locks on suspend independently of swayidle, so the suspend path was covered
+the whole time. What was actually dead for eight days is the **idle** lock: five minutes of
+inactivity locked nothing, and `after-resume` never fired. `pgrep -c -u blankpad
+'swayidle|swaylock|hyprlock|gtklock'` = 0 remains true; it simply did not mean *no lock path at
+all*, because a locker can be a hook inside a running shell rather than a name on the process list.
+Read the inhibitor table, not only `pgrep`.
+
+Three settings, each with a job: `Restart=always`, because a supervisor must not assume it can
+only die badly; `StartLimitIntervalSec=0`, because a fast loop must never wedge it into `failed` —
+a lock that keeps trying beats one that stopped trying; and `PartOf=graphical-session.target`,
+because the unit is wanted by `default.target`, so the session coming back did not bring *it*
+back.
+
+Verify by behaviour rather than by reading the file — the point is surviving the event that killed
+it in October:
+
+```bash
+systemctl --user start swayidle-lock.service
+kill -TERM "$(systemctl --user show swayidle-lock.service -p MainPID --value)"
+sleep 8 && systemctl --user show swayidle-lock.service -p NRestarts -p MainPID -p ActiveState
+```
+
+An idle inhibitor also disarms the timeout outright, which surprises people: while an `omp` agent
+session is running, swayidle logs `Not enabling timeouts: idle inhibitor found` and arms no idle
+timeout at all — `systemd-inhibit --list` shows `omp … idle "omp agent session" block`. A box with
+an agent working therefore does not lock on inactivity, by harness design, while `before-sleep` and
+`after-resume` keep working. Anyone asking "why did the screen never lock" should read the inhibitor
+table before suspecting the unit.
+
+The general shape: `deploy.sh` only ever *enables*. Nothing on any box re-checks that a unit the
+system depends on is still running, so a security posture can lapse silently and stay lapsed for a
+week. A liveness check for this tier belongs in the heartbeat, not in a human's memory. Refs #47.

omp-docs/tools/index.md

@@ -19,6 +19,9 @@ Configuration guides and reference material for installed software. Each tool ha
 * [neovim](neovim.md) — Two editors in one binary: vanilla `nvim` for quick edits and the `lazyvim` NVIM_APPNAME profile, with the base16 wallpaper-palette hook and fresh-box install.
 * [niri](niri/index.md) — Scrollable-tiling Wayland compositor — configuration, keybindings, and architecture for the workstation.
 * [noctalia-shell](noctalia-shell.md) — Native desktop environment for Niri — launcher, control center, settings, lock screen, session menu, hotkey overlay, media controls, and system management.
+* [packages](packages.md) — `packages/*.pkgs` desired state and the two tools that keep a machine and its manifest agreeing: `install.sh` installs the delta, `pkg-inventory.sh` reports what the machine has outgrown.
+* [pcie-probe](pcie-probe.md) — HIP probes that separate PCIe link bandwidth from the engine's read path at the expert-slab size, and the refuse-by-default guard against benchmarking beside a live service.
+* [remote-job](remote-job.md) — Detached job runner for `ssh` work: completion sentinels on the host replace the `tail -f | sed -n /ready/q` pattern that reported success on jobs that never finished.
 * [tmux](tmux.md) — Terminal multiplexer configuration, extended-keys setup, keyboard input best practices, and reload/restart procedures.
 
 ## Adding a New Tool

omp-docs/tools/packages.md

@@ -0,0 +1,106 @@
+---
+type: reference
+title: package desired state
+description: packages/*.pkgs plus the two tools that keep a machine and its manifest agreeing — install.sh installs desired-minus-installed, pkg-inventory.sh reports installed-minus-declared.
+tags:
+  - packages
+  - pacman
+  - provisioning
+  - fleet
+  - blankpad
+verified: 2026-10-20
+timestamp: 2026-10-20
+---
+
+# Package desired state
+
+Two tools, one invariant: **the manifests must describe the machine.** A rebuild is only faithful
+if both directions are checked.
+
+|tool|direction|writes|
+|---|---|---|
+|`scripts/install.sh`|desired → installed|installs `desired − installed` with `--apply`; never removes|
+|`scripts/pkg-inventory.sh`|installed → declared|nothing — read-only report|
+
+## Manifests
+
+`packages/common.pkgs` (every host) + `packages/<host>.pkgs` (this host) + `packages/aur.pkgs`
+(AUR-only, installed through `yay`). The parser is `sed 's/#.*//'` then the first field, so `#`
+comments trail freely and one token per line is the whole grammar. An unknown `--host` gets the
+common manifest only: a wrong-host run is a no-op, not a hazard.
+
+## Rebuild a workstation
+
+1. Install the OS (CachyOS, niri/noctalia profile). The installer's own package set is *not* in the
+   manifests and must not be — see the baseline law below.
+2. Clone this repo to `~/.omp`, then `scripts/install.sh --apply` — packages first, because the
+   enablement step needs `sshd` and `firewalld` present ([dotfiles-deploy](dotfiles-deploy.md)).
+3. `scripts/deploy.sh sync` for the config tier ([dotfiles-deploy](dotfiles-deploy.md)).
+4. `scripts/pkg-inventory.sh --emit` on a *known-good* machine and fold the output into
+   `packages/<host>.pkgs` / `packages/aur.pkgs` before step 2 — that is how a hand install stops
+   being invisible to the next rebuild.
+
+## pkg-inventory report
+
+```
+undeclared additions (declare these): N        ← exit 1 when N > 0
+  repo (sync dbs): <names>                     → belongs in packages/<host>.pkgs
+  aur (needs a helper): <names>                → belongs in packages/aur.pkgs
+installer-provided, undeclared: N + names      → a reinstall supplies these; do not declare
+declared, not installed: <names>               → install.sh installs these
+orphans ignored: <names>                       → pacman -Qtdq
+flatpak: <app ids>                             → reported only, install.sh installs no flatpaks
+```
+
+Exit codes: `0` clean · `1` drift · `2` usage · `3` classification impossible. Overrides
+`PKGINV_REPO` / `PKGINV_HOST` / `PKGINV_LOG` / `PKGINV_BASELINE` exist for tests.
+
+## Law: the installer's own day is the baseline
+
+Whether a package is *yours* is decided by the pacman log, not by opinion: the baseline date is the
+oldest `[ALPM] installed` entry — Calamares' pacstrap — and everything installed **on or before** it
+is installer furniture. Without that cut, a base install reports several hundred "additions" and the
+list nobody can act on is worse than no list.
+
+- **Read the rotated logs too** (`pacman.log.N`, `.N.gz`). On a machine older than the rotation
+  window the install day exists only there; skip them and the whole base system is reported as
+  hand-installed.
+- Calamares keeps installing the desktop for minutes after the base transaction, which is why the
+  date cut is inclusive.
+
+## Law: refuse rather than guess the AUR split
+
+`aur.pkgs` vs `<host>.pkgs` is decided by whether any sync database can serve the name — Chaotic-AUR
+counts as a sync database, so only true AUR belongs in `aur.pkgs`. If the sync databases are
+unavailable the tool exits `3` instead of assuming: guessing sends every package to `yay`, which is
+how a manifest becomes a pile of source builds.
+
+Classify with `pacman -Sl` (world-readable). **`pacman -Sqq` requires root** — a tool that only
+reads the machine must not need sudo to answer a question about it.
+
+**Known gap:** `aur.pkgs` is read for *every* host, so a desktop-only AUR package (a niri module, a
+GUI client) cannot be declared there without asking the headless servers to build it. Such a name is
+still reported as an AUR addition; leave it undeclared until `install.sh` grows a per-host AUR
+manifest.
+
+## Law: orphans never reach a manifest
+
+`pacman -Qtdq` names are packages nothing depends on; emitting them would teach a fresh machine to
+install the same dead weight. They are printed as `orphans ignored` and excluded from `--emit`.
+
+## Two traps that produced this tool
+
+- **`set -o pipefail` plus `head -1`**: `head` closes the pipe, `sort` dies of `SIGPIPE`, the
+  substitution returns `141`, and `set -e` aborts the script. It survives a small test fixture and
+  fails on a real 1000-line install-day log — take a minimum in one pass (`awk 'END'`-style), never
+  sort-then-first. The same applies to `awk 'NR==1{exit}'`, which closes the pipe exactly as `head`
+  does.
+- **`tr '\n' ' '` swallows the final newline** and `fold` faithfully preserves that absence, so the
+  next report label lands on the same line as the last name. `tr '\n' ' '; echo` instead.
+
+## Related
+
+- [tools/index](index.md) · [dotfiles-deploy](dotfiles-deploy.md) (the config tier that follows) ·
+  [live-sync](live-sync.md) (the heartbeat that commits machine state)
+- Tests: `tests/pkg-inventory.bats` (fixtures + stubbed `pacman`, no real package database touched).
+- Refs #51.

omp-docs/tools/pcie-probe.md

@@ -0,0 +1,92 @@
+---
+type: reference
+title: pcie-probe — link or read path
+description: HIP instruments that separate PCIe link bandwidth from the engine's read path at the real expert-slab size, plus the refuse-by-default guard that stops a benchmark from running beside a live service.
+tags:
+  - gpu
+  - rocm
+  - rdna4
+  - benchmarking
+  - dankserver
+verified: 2026-10-20
+timestamp: 2026-10-20
+---
+
+# pcie-probe
+
+`scripts/pcie-probe.sh` answers one question, which comes up every time MoE
+expert offload is discussed on the R9700 box
+([dankserver](../system/dankserver.md)): **is the stall the PCIe link, or is it
+the engine's read path?** The two look identical from the outside — decode is
+slow while weights stream in — and they have opposite fixes.
+
+## Instruments
+
+Sources in `scripts/probes/`, built with the host `hipcc`:
+
+| Probe | Question it answers |
+|-------|---------------------|
+| `hip_smoke.hip` | is host ROCm usable from a plain process at all (count, alloc, copy) |
+| `pcie_bw.hip` | host→device bandwidth at the engine's exact slab size, pinned vs pageable |
+| `pcie_probe.hip` | the size sweep — where throughput collapses as transfers shrink |
+
+```bash
+scripts/pcie-probe.sh                      # guard, build, topology, measure
+scripts/pcie-probe.sh --device 0 --device 1
+scripts/pcie-probe.sh --build-only         # compile, never touch the cards
+```
+
+## The law: never benchmark beside a live service
+
+The guard runs **before anything is built or run** and refuses when the GPU is
+occupied — `gpu_busy_percent` above `PCIE_PROBE_MAX_BUSY` (default 5 %) or any
+process holding `/dev/kfd`. Refusal is exit `3`, and it stops nothing.
+
+Auto-stopping a production endpoint is not this tool's decision to make, and a
+measurement taken as noise beside serving traffic is worthless anyway: it is
+both disruptive and wrong. Take the service down deliberately, or pass `--force`
+and mean it. `tests/pcie-probe.bats` pins that the refusal happens before the
+build step, so a contended box cannot be measured by accident.
+
+## Reading the numbers
+
+The reference is the **link**, printed as a topology block from sysfs
+(`current_link_width` / `current_link_speed` against `max_*`): a card trained to
+fewer lanes or a lower generation than it is wired for caps everything
+downstream, and no engine change will recover it.
+
+Then the sweep table, whose first row is the engine's actual expert-slab size —
+throughput at *that* size is what matters, not the big-transfer figure:
+
+- Small transfers reach the trained-link ceiling → the link is healthy, the
+  engine's read path (fetch granularity, pipelining, pinning) is the limit.
+- Small transfers stall far below a large-transfer figure → the wall is the
+  link or the IOMMU path, not the engine.
+- Pinned versus pageable columns apart means pinning is load-bearing; together
+  means the copies are already pinned by someone else.
+
+Measure one device at a time (`--device`). A run that lets the runtime pick
+several devices cannot attribute bandwidth to a card at all.
+
+## The trap carried in the sources
+
+`hipGetDeviceProperties` **segfaults** on the ROCm build these probes were
+written against, while `hipGetDeviceCount` works fine and reports every device.
+None of the three sources calls it; device identity comes from sysfs instead.
+The setvbuf call in `hip_smoke.hip` is a fossil of discovering that — an
+unflushed stdout hid the crash point for an afternoon. Keep both facts intact
+when touching these files.
+
+## Exit status and seams
+
+`0` measured · `2` usage or no sources · `3` refused, GPU busy · `4` no HIP
+toolchain or build failed. A client box without the SDK exits `4` loudly rather
+than reporting an empty success; the probes belong on the box with the cards.
+
+Test seams (all documented in the script header): `PCIE_PROBE_SRC`,
+`PCIE_PROBE_BUILD`, `PCIE_PROBE_SYSFS`, `PCIE_PROBE_KFD`, `PCIE_PROBE_HIPCC`,
+`PCIE_PROBE_MAX_BUSY` — the sysfs/kfd paths are what make a refusal testable on
+a machine with no cards, which is the only honest way to test a refusal.
+
+Measured campaign numbers are not kept here; they belong with the endpoint they
+were taken on, in the serverAppConfigs LLM runbook vault.

omp-docs/tools/remote-job.md

@@ -0,0 +1,83 @@
+---
+type: reference
+title: remote-job — detached jobs that outlive the session
+description: Run a command on a remote box so its result survives the connection, the restart, and the agent that started it — the replacement for ssh piped through tail and sed, which reported success on jobs that never finished.
+tags:
+  - ssh
+  - fleet
+  - automation
+  - verification
+verified: 2026-10-20
+timestamp: 2026-10-20
+---
+
+# remote-job
+
+`scripts/remote-job.sh` starts a command **detached on the host**, and reports
+what actually happened from files on disk. It exists because
+`ssh host 'cmd | tail -f log | sed -n /ready/q'` lied repeatedly during the
+worktree campaign.
+
+## Why the pipe lies
+
+Three independent failure modes, all of them structural:
+
+- **The broker kills long-lived ssh.** A job longer than the connection's
+  patience dies mid-run; the caller sees a closed pipe, not a failure.
+- **A readiness pattern can match a log header.** `sed -n /building/q` fires on
+  a banner printed before the work starts — the job is at line 1 and the caller
+  already moved on.
+- **`sed -n /x/q` exits the instant it matches.** Even when the pattern is
+  genuinely ready-shaped, the pipeline tears down the remote command it was
+  watching. Result: green report, dead job.
+
+The only reliable signal is a **completion sentinel written by the job itself**,
+read afterwards by a short-lived connection. That is what this is.
+
+## Contract
+
+```bash
+remote-job.sh start NAME [--] CMD...   # launch detached, return at once
+remote-job.sh status [NAME]            # one line per job; exit 0 only if all DONE
+remote-job.sh wait NAME [SEC] [N]      # block until DONE or timeout, then tail N lines
+remote-job.sh out NAME [N]             # tail a job's output
+remote-job.sh tail [NAME]              # follow one job, or every job at once
+remote-job.sh watch                    # refreshing status, for a spare pane
+```
+
+Job dir `$REMOTE_JOBS_DIR` (default `$HOME/jobs`). Per job: `NAME.out` (stdout+
+stderr), `NAME.rc` (exit code), `NAME.done` (sentinel, **written last**).
+
+Exit status of the *report*: `0` all reported jobs finished · `1` unfinished or
+timed out · `2` usage. The `rc=` column is the job's own code — a job that
+failed is still `DONE rc=7` and `status` exits `0`, because "is it finished" and
+"did it work" are different questions a supervisor must be able to ask
+separately.
+
+Written for the case where the job **restarts the endpoint the agent itself is
+running on**: the ssh connection dies, the session may die, and the answer is
+still sitting in `$JOBS` when a session comes back.
+
+## Use over ssh
+
+```bash
+ssh dankserver ~/.omp/scripts/remote-job.sh start swap -- \
+  bash -c 'systemctl --user restart frank-archon && <the health probe that endpoint answers>'
+ssh dankserver ~/.omp/scripts/remote-job.sh wait swap 300 20   # short-lived reconnect
+```
+
+Each ssh call is short, so there is nothing there to abort, and the second call
+can be made from a fresh session on a machine that rebooted underneath it.
+
+## Failure modes
+
+| Event | Result |
+|-------|--------|
+| Session/connection dies mid-job | job keeps running; `status` from anywhere reports it |
+| Command name is wrong | `PENDING (no output yet)`, exit 1 — never a false DONE |
+| Job exits non-zero | `DONE rc=N`; the code is data, not the report's status |
+| Two jobs, same NAME | the second replaces the first's state files |
+| Job dir missing | created on first use |
+
+Pinned by `tests/remote-job.bats` (black-box: output, exit codes, sentinel
+ordering — never internals).

packages/blankpad.pkgs

@@ -3,3 +3,35 @@
 # pkgbase amd-ucode (split pkgname amd-ucode). No module options needed.
 
 amd-ucode
+
+# Hand-installed additions, measured by scripts/pkg-inventory.sh on 2026-10-20 against the
+# Calamares install day (baseline 2026-09-07). These stay out of common.pkgs: none of them belong
+# on the headless servers. install.sh installs them only where they are missing, so this list
+# changes nothing on the running box — it is what makes the next rebuild faithful.
+bun
+cachyos-gaming-applications
+curlftpfs
+flatpak
+fuse2
+fuseiso
+ghostty-nautilus
+glow
+gnome-calculator
+gnome-disk-utility
+nodejs
+npm
+obsidian
+partitionmanager
+plezy
+proton-mail-bin
+python-yaml
+quickshell
+shelly-flatpak-backend
+sshfs
+tmux
+ttf-proggyclean-nerd
+ttf-terminus-nerd
+wine-cachyos
+
+# nirimod-git is an AUR addition deliberately left undeclared: aur.pkgs is read by every host, and
+# a niri module must not be built on the servers. See the known gap in omp-docs/tools/packages.md.

scripts/deploy.sh

@@ -123,6 +123,14 @@ if [ "$MODE" != "check" ] && [ -d "$PKGS_DIR/systemd-user/.config/systemd/user"
   for unit in "$PKGS_DIR"/systemd-user/.config/systemd/user/*.service; do
     [ -e "$unit" ] || continue
     bin="$(sed -n 's/^ExecStart=\([^ ]*\).*/\1/p' "$unit" | head -1)"
+    # systemd expands specifiers inside ExecStart; this shell does not. Matching the literal
+    # `%h/…` makes a unit of THIS box look foreign and skips it in silence — which is exactly
+    # how live-sync.service, the repo's own heartbeat, has been reported "absent on this
+    # host" on every machine that deployed it. Expand what a user unit can carry; leave any
+    # other specifier unmatched rather than guess at it. Refs #44.
+    bin="${bin//%h/$HOME}"
+    bin="${bin//%u/$(id -un)}"
+    bin="${bin//%U/$(id -u)}"
     if [ -n "$bin" ] && command -v "$bin" >/dev/null 2>&1; then
       name="$(basename "$unit")"
       # Read the state, not the exit status: `is-enabled` exits 1 for a `linked` unit exactly

scripts/gen-keybinds.sh

@@ -42,17 +42,27 @@ gen() {
   echo "> GENERATED by \`scripts/gen-keybinds.sh\` from \`$(basename "$KBD")\` — do not edit by hand."
   echo
   awk '
-    # section header: // ─── Name ───
-    /^[[:space:]]*\/\/[[:space:]]*─+ (.+) ─+[[:space:]]*$/ {
+    # Section marker: a comment decorated with box-drawing dashes on both sides,
+    # `// ─── Name ───`. The dash is matched as a LITERAL and removed with gsub — never
+    # with a quantifier on the multibyte character. Under LC_ALL=C (cron, systemd units,
+    # agent shells) gawk works byte-wise, `─+` then means "the last byte of ─, repeated",
+    # and every header vanishes while the script still exits 0. Plain comments stay
+    # comments: only a dash-decorated one opens a section.
+    /^[[:space:]]*\/\/[[:space:]]*─/ {
       s = $0
-      sub(/^[[:space:]]*\/\/[[:space:]]*─+ /, "", s)
-      sub(/ ─+[[:space:]]*$/, "", s)
-      if (in_table) print ""
-      print "## " s
-      print ""
-      print "| Key | Action |"
-      print "|-----|--------|"
-      in_table = 1
+      sub(/^[[:space:]]*\/\/[[:space:]]*/, "", s)
+      sub(/[[:space:]]+$/, "", s)
+      if (s ~ /─ .*─/) {
+        gsub(/─/, "", s)
+        gsub(/[[:space:]]+/, " ", s)
+        sub(/^ /, "", s); sub(/ $/, "", s)
+        if (in_table) print ""
+        print "## " s
+        print ""
+        print "| Key | Action |"
+        print "|-----|--------|"
+        in_table = 1
+      }
       next
     }
     # bind line: KEY [flags] [hotkey-overlay-title="..."] { action; }

scripts/kb-coverage.py

@@ -4,7 +4,15 @@ import re, sys
 from pathlib import Path
 kb = Path(sys.argv[1])
 issues = []
-dirs = sorted({p.parent for p in kb.rglob("*.md")})
+
+
+def kept(p):
+    # `.AGENTTRASH/` is quarantine, not bundle content: a gate that flags it pushes an
+    # agent to delete a page that is only waiting for a pruning session with the operator.
+    return ".AGENTTRASH" not in p.parts
+
+
+dirs = sorted({p.parent for p in kb.rglob("*.md") if kept(p)})
 for d in dirs:
     idx = d / "index.md"
     if not idx.is_file() and d != kb:
@@ -21,12 +29,16 @@ for d in dirs:
     # wikilinks too
     wl_names = {m.group(1).strip().rsplit("/", 1)[-1] for m in re.finditer(r"\[\[([^\]|#]+)", text)}
     for sib in sorted(d.iterdir()):
+        if sib.name == ".AGENTTRASH":
+            continue
         if sib.suffix != ".md" or sib.name == "index.md":
             continue
         if sib.resolve() not in linked and sib.stem not in wl_names:
             issues.append(f"{d.relative_to(kb)}/index.md: does not link {sib.name}")
     # subdirs of d linked as their index?
     for sub in sorted(d.iterdir()):
+        if sub.name == ".AGENTTRASH":
+            continue
         if sub.is_dir() and (sub / "index.md").is_file():
             subidx = (sub / "index.md").resolve()
             dirref = sub.resolve()

scripts/kb-lint.sh

@@ -12,7 +12,15 @@ from pathlib import Path
 kb = Path(sys.argv[1])
 violations = []
 
-for p in sorted(kb.rglob("*.md")):
+def pages():
+    """Markdown pages that belong to the bundle. `.AGENTTRASH/` is a quarantine, not
+    content: linting a deleted-but-not-yet-pruned page would demand its destruction to
+    make the gate go green, which is the wrong incentive."""
+    for p in kb.rglob("*.md"):
+        if ".AGENTTRASH" not in p.parts:
+            yield p
+
+for p in pages():
     rel = p.relative_to(kb)
     text = p.read_text(errors="replace")
     lines = text.splitlines()
@@ -38,9 +46,21 @@ for p in sorted(kb.rglob("*.md")):
     if not isinstance(fm, dict) or not str(fm.get("type", "")).strip():
         violations.append(f"{rel}: frontmatter lacks required 'type:'")
 
+
+# One work log per bundle, at the bundle root. A `log.md` is a reserved name, but
+# reserved does not mean "allowed in every directory": per-directory logs are how a
+# bundle ends up with fifty of them, the entry never where the next agent looks, and
+# each copy dating the same event differently. A bundle with no log at all is left to
+# the maintenance page to nag about; this gate's job is sprawl.
+logs = sorted(str(p.relative_to(kb)) for p in pages() if p.name == "log.md")
+if len(logs) > 1 or (logs and logs[0] != "log.md"):
+    violations.append(
+        "a bundle has one work log, log.md, at the bundle root; found: " + ", ".join(logs)
+    )
+
 # link integrity: fenced code blocks hold example paths, not live links — strip first.
 # Vendored spec is exempt: its example paths are illustrations, not live links.
-for p in sorted(kb.rglob("*.md")):
+for p in pages():
     if str(p.relative_to(kb)) == "references/okf-spec.md":
         continue
     text = re.sub(r"^```[^\n]*$^```[^\n]*$", "", p.read_text(errors="replace"), flags=re.M)

scripts/pcie-probe.sh

@@ -0,0 +1,126 @@
+#!/usr/bin/env bash
+# scripts/pcie-probe.sh — is the decode bottleneck the LINK, or the engine's read path?
+#
+# Instruments live in scripts/probes/: hip_smoke.hip answers "is the host ROCm usable from a plain
+# process", pcie_bw.hip measures host→device bandwidth at the engine's real expert-slab size, and
+# pcie_probe.hip sweeps sizes so a stall can be attributed to the link rather than to the engine.
+# Written during the RDNA4 expert-offload campaign, kept because the same cards are in Dankserver.
+#
+# LAW — never benchmark beside a live service. The guard below runs BEFORE anything is built or run,
+# and it stops nothing: putting a production endpoint down is not this tool's decision to make. When
+# you have deliberately decided that contention is acceptable, say so with --force.
+#
+# Trap carried in the sources: hipGetDeviceProperties SEGFAULTS on this ROCm build even though
+# hipGetDeviceCount works fine and reports every device. Nothing here calls it. Keep it that way.
+#
+# usage: pcie-probe.sh [--device N]... [--build-only] [--force]
+#
+#   --device N    measure this device; repeat for each card. Without it the probes run once with the
+#                 environment's own device selection — one shared run cannot attribute bandwidth.
+#   --build-only  compile and stop; never touches the cards.
+#   --force       measure even though the guard says the GPU is busy.
+#
+# Environment (defaults in parentheses) — the sysfs and kfd paths are overridable so the guard can
+# be tested on a machine with no cards, which is the only honest way to test a refusal:
+#   PCIE_PROBE_SRC     probe sources    (<repo>/scripts/probes)
+#   PCIE_PROBE_BUILD   build output     ($HOME/.cache/pcie-probe)
+#   PCIE_PROBE_SYSFS   drm sysfs root   (/sys/class/drm)
+#   PCIE_PROBE_KFD     KFD device node  (/dev/kfd)
+#   PCIE_PROBE_HIPCC   compiler         (hipcc)
+#   PCIE_PROBE_MAX_BUSY  refusal threshold, percent (5)
+#
+# Exit status: 0 measured · 2 usage or missing sources · 3 REFUSED, GPU busy · 4 no toolchain or
+# build failed.
+
+set -uo pipefail
+
+SRC="${PCIE_PROBE_SRC:-$(dirname "$(realpath "$0")")/probes}"
+BUILD="${PCIE_PROBE_BUILD:-$HOME/.cache/pcie-probe}"
+SYSFS="${PCIE_PROBE_SYSFS:-/sys/class/drm}"
+KFD="${PCIE_PROBE_KFD:-/dev/kfd}"
+HIPCC="${PCIE_PROBE_HIPCC:-hipcc}"
+MAX_BUSY="${PCIE_PROBE_MAX_BUSY:-5}"
+
+force=0
+build_only=0
+devices=()
+while [[ $# -gt 0 ]]; do
+  case "$1" in
+    --device)     [[ $# -ge 2 ]] || { echo "pcie-probe: --device needs an argument" >&2; exit 2; }
+                  devices+=("$2"); shift 2 ;;
+    --build-only) build_only=1; shift ;;
+    --force)      force=1; shift ;;
+    *)            echo "usage: pcie-probe.sh [--device N]... [--build-only] [--force]" >&2; exit 2 ;;
+  esac
+done
+
+mapfile -t sources < <(find "$SRC" -maxdepth 1 -name '*.hip' 2>/dev/null | sort)
+if (( ${#sources[@]} == 0 )); then
+  echo "pcie-probe: no .hip probe sources in $SRC" >&2
+  exit 2
+fi
+
+# ---- the guard, before anything touches the card --------------------------------
+if (( ! force )); then
+  busy=""
+  if [[ -e "$KFD" ]] && command -v fuser > /dev/null 2>&1; then
+    holders="$(fuser "$KFD" 2>/dev/null | tr -s '[:space:]' ' ')"
+    [[ -n "${holders// /}" ]] && busy="KFD in use by:${holders}"
+  fi
+  for card in "$SYSFS"/card*; do
+    [[ -f "$card/device/gpu_busy_percent" ]] || continue
+    pct="$(cat "$card/device/gpu_busy_percent" 2>/dev/null)"
+    [[ "$pct" =~ ^[0-9]+$ ]] || continue
+    (( pct > MAX_BUSY )) && busy="${busy:+$busy; }$(basename "$card") at ${pct}%"
+  done
+  if [[ -n "$busy" ]]; then
+    printf 'pcie-probe: REFUSED — GPU busy (%s)\n' "$busy" >&2
+    printf '           never benchmark beside a live service. Take the service down deliberately,\n' >&2
+    printf '           or pass --force if you have decided the contention is acceptable.\n' >&2
+    exit 3
+  fi
+fi
+
+# ---- build ----------------------------------------------------------------------
+if ! command -v "$HIPCC" > /dev/null 2>&1; then
+  printf 'pcie-probe: no HIP toolchain (%s) — run this on the box with the cards, not here\n' "$HIPCC" >&2
+  exit 4
+fi
+mkdir -p "$BUILD"
+for src in "${sources[@]}"; do
+  bin="$BUILD/$(basename "${src%.hip}")"
+  if ! "$HIPCC" -O2 -o "$bin" "$src" 2>&1 | tail -3; then
+    printf 'pcie-probe: build failed for %s\n' "$(basename "$src")" >&2
+    exit 4
+  fi
+done
+if (( build_only )); then
+  printf 'pcie-probe: built %s probe(s) into %s\n' "${#sources[@]}" "$BUILD"
+  exit 0
+fi
+
+# ---- topology: the link the numbers must be read against ------------------------
+printf 'pcie-probe host=%s hipcc=%s probes=%s\n' "$(hostname)" "$HIPCC" "${#sources[@]}"
+for card in "$SYSFS"/card*; do
+  [[ -f "$card/device/current_link_width" ]] || continue
+  printf '  link %-9s current x%s @ %s   max x%s @ %s\n' "$(basename "$card")" \
+    "$(cat "$card/device/current_link_width")" \
+    "$(cat "$card/device/current_link_speed" 2>/dev/null || echo '?')" \
+    "$(cat "$card/device/max_link_width" 2>/dev/null || echo '?')" \
+    "$(cat "$card/device/max_link_speed" 2>/dev/null || echo '?')"
+done
+
+# ---- measure, per device --------------------------------------------------------
+(( ${#devices[@]} > 0 )) || devices=(default)
+for d in "${devices[@]}"; do
+  if [[ $d == default ]]; then
+    printf '\n########## engine device selection ##########\n'
+  else
+    printf '\n########## device %s ##########\n' "$d"
+  fi
+  for name in hip_smoke pcie_bw pcie_probe; do
+    bin="$BUILD/$name"
+    [[ -x "$bin" ]] || continue
+    if [[ $d == default ]]; then "$bin"; else HIP_VISIBLE_DEVICES="$d" "$bin" "$d"; fi
+  done
+done

scripts/pkg-inventory.sh

@@ -0,0 +1,159 @@
+#!/usr/bin/env bash
+# scripts/pkg-inventory.sh — what does this machine have that packages/*.pkgs does not declare?
+#
+# install.sh walks desired → installed. This walks installed → declared, and the pair is what
+# makes a rebuild honest: a manifest the machine has quietly outgrown reproduces a machine that
+# is missing the tools you installed by hand six weeks ago, and nothing notices until the new box
+# has no tmux. Refs #51.
+#
+# The baseline is what separates "you installed this" from "the installer installed this". It is
+# read from the pacman log — the install-day transactions, dated at the oldest `[ALPM] installed`
+# line — because declaring Calamares furniture in a manifest is bookkeeping for something a
+# reinstall provides for free. Rotated logs (pacman.log.N, .N.gz) are read too: on a machine older
+# than the rotation window the install day lives only there, and skipping them would report the
+# entire base system as hand-installed.
+#
+# Report (stdout):
+#   undeclared additions (declare these):  N     hand-installed, absent from the manifests
+#     repo (sync dbs): <names>                   → belongs in packages/<host>.pkgs
+#     aur (needs a helper): <names>              → belongs in packages/aur.pkgs (yay)
+#   installer-provided, undeclared: N            a reinstall supplies these; do not declare
+#   declared, not installed: N                    install.sh installs these
+#   orphans ignored: <names>                     pacman -Qtdq — never emitted
+#   flatpak: <app ids>                           reported only, install.sh installs no flatpaks
+#
+# --emit prints the additions as manifest lines, ready to fold into packages/. Names are bare
+# tokens so install.sh's `sed 's/#.*//'` + first-field parser reads them unchanged.
+#
+# Exit status: 0 clean · 1 drift (undeclared additions exist) · 2 usage · 3 cannot classify
+# (pacman log unreadable or sync databases unavailable — worse to guess than to say so, because
+# guessing would dump every package into aur.pkgs).
+#
+# Environment overrides (tests):
+#   PKGINV_REPO      repo root holding packages/  (default: git toplevel of this script)
+#   PKGINV_HOST      host name                    (default: $(hostname))
+#   PKGINV_LOG       space-separated pacman logs  (default: /var/log/pacman.log + rotated)
+#   PKGINV_BASELINE  YYYY-MM-DD, inclusive        (default: oldest install date in the logs)
+
+set -euo pipefail
+export LC_ALL=C     # comm/sort agreement: pacman's order is not this order
+
+MODE="report"
+while [[ $# -gt 0 ]]; do
+  case "$1" in
+    --emit) MODE="emit"; shift ;;
+    -h | --help) sed -n '2,40p' "$0"; exit 0 ;;
+    *) echo "usage: pkg-inventory.sh [--emit]" >&2; exit 2 ;;
+  esac
+done
+
+REPO="${PKGINV_REPO:-}"
+if [[ -z "$REPO" ]]; then
+  REPO="$(git -C "$(dirname "$(realpath "$0")")" rev-parse --show-toplevel 2>/dev/null || true)"
+fi
+[[ -n "$REPO" && -d "$REPO/packages" ]] || { echo "pkg-inventory: no packages/ under ${REPO:-<repo>}" >&2; exit 2; }
+HOST="${PKGINV_HOST:-$(hostname)}"
+
+TMP="$(mktemp -d)"; trap 'rm -rf "$TMP"' EXIT
+
+read_manifest() { # same parser install.sh uses, so a name means the same thing to both
+  sed 's/#.*//' "$1" | tr -d '\r' | awk '{if ($1) print $1}'
+}
+# ---- installed state ---------------------------------------------------------
+# Four queries are the tool's whole interface to pacman. -Sl is the unprivileged sync listing:
+# -Sqq asks for root, and a read of the machine must not need sudo. Field 2 of -Sl is the package
+# name, and one name can appear in several databases (core/extra/cachyos), hence the sort -u.
+pacman -Qqe > "$TMP/explicit"
+pacman -Qq > "$TMP/installed"
+pacman -Qtdq > "$TMP/orphans" 2>/dev/null || true   # exit 1 when the list is empty: no orphans
+if ! pacman -Sl > "$TMP/sync.raw" 2>/dev/null || [[ ! -s "$TMP/sync.raw" ]]; then
+  echo "pkg-inventory: no sync database available (run: sudo pacman -Sy) — repo vs AUR cannot be classified" >&2
+  exit 3
+fi
+awk '{print $2}' "$TMP/sync.raw" | sort -u > "$TMP/sync"
+
+# ---- declared desired state --------------------------------------------------
+: > "$TMP/declared"
+for m in common.pkgs "$HOST.pkgs" aur.pkgs; do
+  [[ -f "$REPO/packages/$m" ]] || continue
+  read_manifest "$REPO/packages/$m" >> "$TMP/declared"
+done
+
+# ---- baseline: what the installer put here -----------------------------------
+logs=()
+if [[ -n "${PKGINV_LOG:-}" ]]; then
+  read -ra logs <<< "$PKGINV_LOG"
+else
+  logs=(/var/log/pacman.log)
+  for f in /var/log/pacman.log.[0-9]*; do [[ -e "$f" ]] && logs+=("$f"); done
+fi
+read_logs() {
+  local f
+  for f in "${logs[@]}"; do
+    [[ -r "$f" ]] || continue
+    case "$f" in *.gz) zcat "$f" ;; *) cat "$f" ;; esac
+  done
+}
+# "YYYY-MM-DD name" for every install event the log remembers.
+read_logs | sed -nE 's/^\[([0-9-]{10})T[^]]*\] \[ALPM\] installed ([^ ]+) \(.*/\1 \2/p' > "$TMP/events"
+[[ -s "$TMP/events" ]] || { echo "pkg-inventory: no install events readable in ${logs[*]} — baseline unknown" >&2; exit 3; }
+
+# Minimum date in a single awk pass. Sorting and then taking the first line — whether with `head`
+# or with an awk that exits early — closes the pipe, and pipefail turns sort's SIGPIPE into a dead
+# script; a real install-day log is long enough for that to bite (it killed the first real run).
+BASELINE="${PKGINV_BASELINE:-$(awk '{ if (m == "" || $1 < m) m = $1 } END { print m }' "$TMP/events")}"
+[[ "$BASELINE" =~ ^[0-9]{4}-[0-9]{2}-[0-9]{2}$ ]] || { echo "pkg-inventory: bad PKGINV_BASELINE '$BASELINE' (want YYYY-MM-DD)" >&2; exit 2; }
+
+# Inclusive: packages installed ON the baseline date came with the install too — Calamares keeps
+# installing the desktop for minutes after the base transaction.
+awk -v d="$BASELINE" '$1 <= d {print $2}' "$TMP/events" | sort -u > "$TMP/base"
+
+for f in explicit installed sync declared base orphans; do sort -u -o "$TMP/$f" "$TMP/$f"; done
+
+# ---- the sets ----------------------------------------------------------------
+# additions: explicit, not declared, and not something the installer handed us.
+comm -23 "$TMP/explicit" "$TMP/declared" > "$TMP/undeclared"
+comm -23 "$TMP/undeclared" "$TMP/base" > "$TMP/additions"
+comm -12 "$TMP/undeclared" "$TMP/base" > "$TMP/installside"
+comm -12 "$TMP/additions" "$TMP/sync" > "$TMP/add.repo"
+comm -23 "$TMP/additions" "$TMP/sync" > "$TMP/add.aur"
+comm -23 "$TMP/declared" "$TMP/installed" > "$TMP/missing"
+
+n() { wc -l < "$1" | tr -d ' '; }
+
+if [[ "$MODE" == emit ]]; then
+  if [[ -s "$TMP/add.repo" ]]; then
+    printf '# packages/%s.pkgs — additions measured %s (pkg-inventory.sh, baseline %s)\n' \
+      "$HOST" "$(date +%F)" "$BASELINE"
+    cat "$TMP/add.repo"
+  fi
+  if [[ -s "$TMP/add.aur" ]]; then
+    printf '# packages/aur.pkgs — additions measured %s (AUR: not in any sync db, install via yay)\n' \
+      "$(date +%F)"
+    cat "$TMP/add.aur"
+  fi
+  exit 0
+fi
+
+printf 'pkg-inventory host=%s baseline=%s repo=%s\n' "$HOST" "$BASELINE" "$REPO"
+printf 'counts declared=%s explicit=%s baseline=%s installed=%s\n' \
+  "$(n "$TMP/declared")" "$(n "$TMP/explicit")" "$(n "$TMP/base")" "$(n "$TMP/installed")"
+printf 'undeclared additions (declare these): %s\n' "$(n "$TMP/additions")"
+printf '  repo (sync dbs): %s\n' "$(tr '\n' ' ' < "$TMP/add.repo")"
+printf '  aur (needs a helper): %s\n' "$(tr '\n' ' ' < "$TMP/add.aur")"
+printf 'installer-provided, undeclared (a reinstall provides these): %s\n' "$(n "$TMP/installside")"
+# The names, folded: this is the answer to "what did the installer mark explicit that I never
+# declared", and it is long — a count alone would force a second run to see it.
+# The echo matters: tr eats the final newline, fold preserves that absence, and the next label
+# would otherwise be glued to the last folded line.
+{ tr '\n' ' ' < "$TMP/installside"; echo; } | fold -s -w 88 | sed 's/^/  /'
+printf 'declared, not installed (install.sh installs these): %s\n' "$(tr '\n' ' ' < "$TMP/missing")"
+printf 'orphans ignored (pacman -Qtdq): %s\n' "$(tr '\n' ' ' < "$TMP/orphans")"
+if command -v flatpak > /dev/null 2>&1 && flatpak list --app --columns=application > "$TMP/flatpak" 2>/dev/null; then
+  printf 'flatpak (reported only; install.sh installs no flatpaks): %s\n' "$(tr '\n' ' ' < "$TMP/flatpak")"
+else
+  printf 'flatpak: not installed on this host\n'
+fi
+
+[[ -s "$TMP/additions" ]] && exit 1
+exit 0

scripts/probes/hip_smoke.hip

@@ -0,0 +1,36 @@
+// Minimal HIP smoke test: is the host ROCm usable from a plain process?
+#include <cstdio>
+#include <cstring>
+#include <hip/hip_runtime.h>
+
+int main(void) {
+    int n = -1;
+    hipError_t e = hipGetDeviceCount(&n);
+    printf("hipGetDeviceCount -> %d (%s), count=%d\n",
+           (int)e, hipGetErrorString(e), n);
+    if (e != hipSuccess || n <= 0) return 1;
+    setvbuf(stdout, NULL, _IONBF, 0);   /* an earlier crash lost the buffer, hiding the crash point */
+    // Device properties are deliberately NOT queried here: hipGetDeviceProperties segfaults on the
+    // ROCm build this probe was written for, even though hipGetDeviceCount above works fine. Card
+    // identity comes from sysfs anyway — scripts/pcie-probe.sh prints the link topology.
+
+    const size_t bytes = 2459136;   /* 2.344 MiB: the engine's expert slab */
+    void *dev = NULL, *host = NULL;
+    if (hipMalloc(&dev, bytes) != hipSuccess) { printf("hipMalloc failed\n"); return 1; }
+    if (hipHostMalloc(&host, bytes, hipHostMallocDefault) != hipSuccess) {
+        printf("hipHostMalloc failed\n"); return 1;
+    }
+    memset(host, 0x5a, bytes);
+
+    hipEvent_t a, b; hipEventCreate(&a); hipEventCreate(&b);
+    hipDeviceSynchronize();
+    hipEventRecord(a, 0);
+    const int iters = 200;
+    for (int i = 0; i < iters; i++) hipMemcpy(dev, host, bytes, hipMemcpyHostToDevice);
+    hipEventRecord(b, 0); hipEventSynchronize(b);
+    float ms = 0; hipEventElapsedTime(&ms, a, b);
+    printf("\n  %.3f MiB x %d iters in %.2f ms -> %.2f GB/s H2D (pinned)\n",
+           bytes/1048576.0, iters, ms, (double)bytes*iters/(ms/1000.0)/1e9);
+    printf("  Gen5 x8 ceiling = 31.5 GB/s\n");
+    return 0;
+}

scripts/probes/pcie_bw.hip

@@ -0,0 +1,64 @@
+// H2D bandwidth at the engine's expert-slab size.
+// Deliberately avoids hipGetDeviceProperties: it segfaults on this ROCm build
+// (hipGetDeviceCount works fine and reports 3 devices).
+#include <cstdio>
+#include <cstring>
+#include <cstdlib>
+#include <hip/hip_runtime.h>
+
+static double one(size_t bytes, bool pinned, int iters) {
+    void *dev = NULL, *host = NULL;
+    if (hipMalloc(&dev, bytes) != hipSuccess) return -1;
+    if (pinned) { if (hipHostMalloc(&host, bytes, hipHostMallocDefault) != hipSuccess) return -1; }
+    else        { host = malloc(bytes); }
+    memset(host, 0x5a, bytes);
+
+    hipEvent_t a, b; hipEventCreate(&a); hipEventCreate(&b);
+    for (int i = 0; i < 3; i++) hipMemcpy(dev, host, bytes, hipMemcpyHostToDevice);
+    hipDeviceSynchronize();
+
+    hipEventRecord(a, 0);
+    for (int i = 0; i < iters; i++) hipMemcpy(dev, host, bytes, hipMemcpyHostToDevice);
+    hipEventRecord(b, 0); hipEventSynchronize(b);
+    float ms = 0; hipEventElapsedTime(&ms, a, b);
+    double gb = (double)bytes * iters / (ms / 1000.0) / 1e9;
+
+    if (!pinned) free(host); else hipHostFree(host);
+    hipFree(dev); hipEventDestroy(a); hipEventDestroy(b);
+    return gb;
+}
+
+int main(int argc, char **argv) {
+    setvbuf(stdout, NULL, _IONBF, 0);
+    int dev = (argc > 1) ? atoi(argv[1]) : 0;
+    if (hipSetDevice(dev) != hipSuccess) { printf("setDevice(%d) failed\n", dev); return 1; }
+    printf("device %d selected\n", dev);
+
+    size_t sz[] = {2459136UL, 3UL<<20, 16UL<<20, 64UL<<20, 256UL<<20, 1UL<<30};
+    printf("  %10s | %7s | %7s | %7s\n", "MiB", "pinned", "pagin.", "xfer us");
+    printf("  %s\n", "-------------------------------------------");
+    for (int i = 0; i < 6; i++) {
+        size_t b = sz[i];
+        int iters = (b >= (1UL<<30)) ? 10 : (b >= (256UL<<20)) ? 20 : 100;
+        double p = one(b, true,  iters);
+        double g = one(b, false, iters);
+        // single-transfer latency
+        void *dv, *hv;
+        if (hipMalloc(&dv, b) == hipSuccess && hipHostMalloc(&hv, b, hipHostMallocDefault) == hipSuccess) {
+            memset(hv, 0x5a, b);
+            hipEvent_t a, c; hipEventCreate(&a); hipEventCreate(&c);
+            hipMemcpy(dv, hv, b, hipMemcpyHostToDevice); hipDeviceSynchronize();
+            hipEventRecord(a, 0);
+            hipMemcpy(dv, hv, b, hipMemcpyHostToDevice);
+            hipEventRecord(c, 0); hipEventSynchronize(c);
+            float ms = 0; hipEventElapsedTime(&ms, a, c);
+            printf("  %10.3f | %7.2f | %7.2f | %7.1f\n", b/1048576.0, p, g, ms*1000.0);
+            hipHostFree(hv); hipFree(dv);
+        } else {
+            printf("  %10.3f | %7.2f | %7.2f |  (alloc failed)\n", b/1048576.0, p, g);
+        }
+    }
+    printf("\n  2.344 MiB is the engine's exact expert slab size.\n");
+    printf("  Gen5 x8 ceiling = 31.5 GB/s per direction.\n");
+    return 0;
+}

scripts/probes/pcie_probe.hip

@@ -0,0 +1,87 @@
+// HIP adaptation of the pcie-link-capability-probe.
+// Question: is the decode bottleneck the LINK, or the engine's read PATH?
+// Measure H2D at the engine's actual expert slab size (2.344 MiB) and across
+// a size sweep. If 2.344 MiB copies reach ~31 GB/s, the link is healthy and
+// the engine is leaving bandwidth on the table. If they stall near 10 GB/s,
+// the link is the wall.
+//
+// build: hipcc -O2 -o pcie_probe pcie_probe.hip   (scripts/pcie-probe.sh does this and guards the run)
+#include <cstdio>
+#include <cstring>
+#include <cstdlib>
+#include <hip/hip_runtime.h>
+
+#define CK(x) do { hipError_t e = (x); if (e != hipSuccess) { \
+    fprintf(stderr, "HIP %s (%s:%d)\n", hipGetErrorString(e), __FILE__, __LINE__); \
+    return 1; } } while (0)
+
+static double ms_between(hipEvent_t a, hipEvent_t b) {
+    float ms = 0; hipEventElapsedTime(&ms, a, b); return (double)ms;
+}
+
+static int bench_size(size_t bytes) {
+    const int iters = bytes >= (1UL<<30) ? 20
+                    : bytes >= (256UL<<20) ? 30
+                    : bytes >= (16UL<<20) ? 60 : 150;
+    void *dev = NULL, *host = NULL, *pageable = NULL;
+    hipStream_t s = NULL;
+    CK(hipMalloc(&dev, bytes));
+    CK(hipHostMalloc(&host, bytes, hipHostMallocDefault));   // PINNED, like the engine's slabs
+    memset(host, 0x5a, bytes);
+    CK(hipStreamCreate(&s));
+    hipEvent_t a, b; CK(hipEventCreate(&a)); CK(hipEventCreate(&b));
+
+    for (int i = 0; i < 3; i++) CK(hipMemcpy(dev, host, bytes, hipMemcpyHostToDevice));
+    CK(hipDeviceSynchronize());
+
+    // sync copy
+    CK(hipEventRecord(a, 0));
+    for (int i = 0; i < iters; i++) CK(hipMemcpy(dev, host, bytes, hipMemcpyHostToDevice));
+    CK(hipEventRecord(b, 0)); CK(hipEventSynchronize(b));
+    double h2d = (double)bytes * iters / (ms_between(a,b)/1000.0) / 1e9;
+
+    // async copy on a stream (the engine's fill pipeline shape)
+    CK(hipEventRecord(a, 0));
+    for (int i = 0; i < iters; i++) CK(hipMemcpyAsync(dev, host, bytes, hipMemcpyHostToDevice, s));
+    CK(hipEventRecord(b, 0)); CK(hipEventSynchronize(b));
+    double h2da = (double)bytes * iters / (ms_between(a,b)/1000.0) / 1e9;
+
+    // single-transfer latency at this size
+    CK(hipMemcpy(dev, host, bytes, hipMemcpyHostToDevice));
+    CK(hipDeviceSynchronize());
+    CK(hipEventRecord(a, 0));
+    CK(hipMemcpy(dev, host, bytes, hipMemcpyHostToDevice));
+    CK(hipEventRecord(b, 0)); CK(hipEventSynchronize(b));
+    double one_us = ms_between(a,b) * 1000.0;
+
+    // pageable, to see whether pinning is load-bearing here
+    pageable = malloc(bytes); memset(pageable, 0x5a, bytes);
+    CK(hipMemcpy(dev, pageable, bytes, hipMemcpyHostToDevice));
+    CK(hipEventRecord(a, 0));
+    for (int i = 0; i < iters; i++) CK(hipMemcpy(dev, pageable, bytes, hipMemcpyHostToDevice));
+    CK(hipEventRecord(b, 0)); CK(hipEventSynchronize(b));
+    double pag = (double)bytes * iters / (ms_between(a,b)/1000.0) / 1e9;
+
+    printf("  %8.3f MiB | %6.2f | %6.2f | %8.1f us | %6.2f\n",
+           bytes/1048576.0, h2d, h2da, one_us, pag);
+
+    free(pageable); hipHostFree(host); hipFree(dev);
+    hipEventDestroy(a); hipEventDestroy(b); hipStreamDestroy(s);
+    return 0;
+}
+
+int main(int argc, char **argv) {
+    int dev_id = 0;
+    if (argc > 1) dev_id = atoi(argv[1]);
+    // No hipGetDeviceProperties here: it segfaults on this ROCm build while hipGetDeviceCount is
+    // fine, and the link topology these numbers must be read against comes from sysfs, which
+    // scripts/pcie-probe.sh prints. Only the device index is needed to pick what to measure.
+    printf("device %d (PCI bus from sysfs, see the topology block above)\n", dev_id);
+    printf("  size      | H2D   | async  | 1x xfer  | pageable   [GB/s]\n");
+    printf("  %s\n", "-----------------------------------------------------------");
+    size_t sz[] = {2459136UL,              /* 2.344 MiB: the engine's exact expert slab */
+                   3UL<<20, 16UL<<20, 64UL<<20, 256UL<<20, 1UL<<30, 2UL<<30};
+    for (int i = 0; i < 7; i++) if (bench_size(sz[i])) return 1;
+    printf("\nGen5 x8 ceiling = 31.5 GB/s per direction\n");
+    return 0;
+}

scripts/remote-job.sh

@@ -0,0 +1,115 @@
+#!/usr/bin/env bash
+# scripts/remote-job.sh — a detached job whose result outlives the session that started it
+#
+# Why this exists rather than `ssh host 'cmd | tail -f | sed -n /ready/q'`, which lied about success
+# repeatedly, for three structural reasons — all of them the pipe's fault: the broker aborts
+# long-lived ssh; a readiness pattern can match a log *header* before the work has begun; and
+# `sed -n /x/q` exits the instant it matches, so the supervisor reports green on a job that never
+# finished.
+#
+# Here the job runs detached on the box it is invoked on (over ssh, or locally). It writes NAME.out,
+# then NAME.rc, then touches NAME.done LAST. Status is then a cheap read of a directory: no
+# long-lived connection to lose, and the answer survives the session, the terminal, and the agent —
+# including the case where the job restarts the very service the agent is running on.
+#
+#   remote-job.sh start NAME [--] CMD...    launch detached, return at once
+#   remote-job.sh status [NAME]             one line per job
+#   remote-job.sh wait NAME [SECONDS] [N]   block until DONE or timeout, then tail N lines
+#   remote-job.sh out NAME [LINES]          print the tail of a job's output
+#   remote-job.sh tail [NAME]               follow one job, or every job at once
+#   remote-job.sh watch                     refreshing status, for a spare pane
+#
+# Job directory: $REMOTE_JOBS_DIR, default $HOME/jobs. Ship this file to the host and run it there;
+# nothing about it is box-specific, which is the point.
+#
+# Exit status: 0 when every job reported is finished · 1 when something is unfinished or a wait
+# timed out · 2 usage. A job that FAILED still counts as finished for `status`: "is it done" and
+# "did it work" are different questions, and the second one is the rc= column.
+
+set -uo pipefail
+
+JOBS="${REMOTE_JOBS_DIR:-$HOME/jobs}"
+mkdir -p "$JOBS"
+
+case "${1:-}" in
+  start)
+    [[ $# -ge 2 ]] || { echo "usage: remote-job.sh start NAME [--] CMD..." >&2; exit 2; }
+    name="$2"; shift 2
+    [[ "${1:-}" == "--" ]] && shift
+    [[ $# -ge 1 ]] || { echo "remote-job: start needs a command for '$name'" >&2; exit 2; }
+    # Clear the previous run entirely: a stale .out would make the new run's line count a lie.
+    rm -f "$JOBS/$name.out" "$JOBS/$name.rc" "$JOBS/$name.done"
+    # setsid leaves the invoking process group, so a dropped ssh or a killed agent takes nothing
+    # down with it. rc lands BEFORE the sentinel: a waiter must never see DONE with no exit code.
+    JOBS="$JOBS" setsid nohup bash -c '
+      name="$1"; shift
+      "$@" > "$JOBS/$name.out" 2>&1
+      echo $? > "$JOBS/$name.rc"
+      touch "$JOBS/$name.done"
+    ' _ "$name" "$@" < /dev/null > /dev/null 2>&1 &
+    printf 'started %s\n' "$name"
+    ;;
+
+  status)
+    if [[ -n "${2:-}" ]]; then
+      names="$2"
+    else
+      names=$(cd "$JOBS" && ls *.out 2>/dev/null | sed 's/\.out$//' | sort)
+    fi
+    pending=0
+    for n in $names; do
+      if [[ -f "$JOBS/$n.done" ]]; then
+        printf '  %-20s DONE   rc=%s  %s lines\n' "$n" \
+          "$(cat "$JOBS/$n.rc" 2>/dev/null)" "$(wc -l < "$JOBS/$n.out" 2>/dev/null | tr -d ' ')"
+      elif [[ -f "$JOBS/$n.out" ]]; then
+        printf '  %-20s RUN    %s lines so far\n' "$n" "$(wc -l < "$JOBS/$n.out" 2>/dev/null | tr -d ' ')"
+        pending=1
+      else
+        printf '  %-20s PENDING (no output yet)\n' "$n"
+        pending=1
+      fi
+    done
+    if [[ -z "$names" ]]; then echo "  (no jobs)"; exit 0; fi
+    exit "$pending"
+    ;;
+
+  wait)
+    [[ $# -ge 2 ]] || { echo "usage: remote-job.sh wait NAME [SECONDS] [TAIL]" >&2; exit 2; }
+    name="$2"; limit="${3:-3600}"; lines="${4:-25}"; waited=0
+    while [[ ! -e "$JOBS/$name.done" ]] && (( waited < limit )); do
+      sleep 1; waited=$((waited + 1))
+    done
+    if [[ -e "$JOBS/$name.done" ]]; then
+      printf 'DONE %s rc=%s\n' "$name" "$(cat "$JOBS/$name.rc" 2>/dev/null)"; rc=0
+    else
+      printf 'TIMEOUT %s after %ss\n' "$name" "$waited"; rc=1
+    fi
+    tail -n "$lines" "$JOBS/$name.out" 2>/dev/null
+    exit "$rc"
+    ;;
+
+  out)
+    [[ $# -ge 2 ]] || { echo "usage: remote-job.sh out NAME [LINES]" >&2; exit 2; }
+    tail -n "${3:-40}" "$JOBS/$2.out" 2>/dev/null
+    ;;
+
+  tail)
+    # Multiplexed follow: no NAME means every job at once, so one pane shows the whole harness.
+    if [[ -n "${2:-}" ]]; then exec tail -f "$JOBS/$2.out"; fi
+    exec tail -f "$JOBS"/*.out
+    ;;
+
+  watch)
+    while true; do
+      clear 2>/dev/null || true
+      date '+%H:%M:%S'
+      "$0" status
+      sleep 5
+    done
+    ;;
+
+  *)
+    echo "usage: remote-job.sh {start|status|wait|out|tail|watch} ..." >&2
+    exit 2
+    ;;
+esac

tests/deploy.bats

@@ -136,3 +136,19 @@ systemd_unit() {
   [[ "$output" == *"SKIP"*otherbox.service* ]]
   ! grep -q enable "$STUB_LOG"
 }
+
+@test "a unit whose ExecStart uses a systemd specifier still resolves here" {
+  # `%h` is expanded by systemd, not by the shell, so matching the literal string makes a
+  # unit belonging to THIS box look foreign and skip it in silence. The victim is this repo's
+  # own heartbeat: `ExecStart=%h/.omp/scripts/live-sync.sh`, skipped on every box. Refs #44.
+  mkdir -p "$HOME/.local/bin"
+  printf '#!/bin/sh\ntrue\n' > "$HOME/.local/bin/helper"
+  chmod +x "$HOME/.local/bin/helper"
+  systemd_unit heartbeat.service '%h/.local/bin/helper'
+  printf 'linked\n' > "$UNIT_STATE"
+  run "$REPO/scripts/deploy.sh"
+  [ "$status" -eq 0 ]
+  [[ "$output" == *"heartbeat.service (already linked"* ]]
+  grep -q 'systemctl --user enable heartbeat.service' "$STUB_LOG"
+  ! grep -q -- '--now' "$STUB_LOG"
+}

tests/gen-keybinds.bats

@@ -48,6 +48,16 @@ teardown() {
   [[ "$output" != *"a plain comment"* ]]
 }
 
+@test "section headers survive a C locale, where awk reads bytes instead of characters" {
+  # Cron, systemd units and agent shells get LC_ALL=C while Frank's terminal does not.
+  # A matcher that puts a quantifier on a multibyte character then loses EVERY section
+  # header and prints a sheet with no sections at all — silently, exit status 0.
+  run env LC_ALL=C "$GEN" "$TMP/keybinds.kdl"
+  [[ "$output" == *"## Applications"* ]]
+  [[ "$output" == *"## Screenshots"* ]]
+  [[ "$output" != *"a plain comment"* ]]
+}
+
 @test "row count matches bind count" {
   run "$GEN" "$TMP/keybinds.kdl"
   local rows

tests/kb-coverage.bats

@@ -0,0 +1,49 @@
+#!/usr/bin/env bats
+# tests/kb-coverage.bats — black-box tests for scripts/kb-coverage.py
+#
+# Contract: exit 0 when every directory of a knowledge bundle has an index.md and each
+# index links its siblings. Observable surface: stdout lines and exit status.
+
+setup() {
+  CHECK="$BATS_TEST_DIRNAME/../scripts/kb-coverage.py"
+  KB="$(mktemp -d)/kb"
+  mkdir -p "$KB/sub"
+  printf '# Index\n\n* [Good](good.md)\n* [Sub](sub/)\n' > "$KB/index.md"
+  printf '# Sub\n\n* [Deep](deep.md)\n' > "$KB/sub/index.md"
+  printf 'body\n' > "$KB/good.md"
+  printf 'body\n' > "$KB/sub/deep.md"
+}
+
+teardown() { rm -rf "$(dirname "$KB")"; }
+
+@test "a bundle whose directories index their contents passes" {
+  run python3 "$CHECK" "$KB"
+  [ "$status" -eq 0 ]
+  [[ "$output" == *"0 issue(s)"* ]]
+}
+
+@test "a directory nobody indexes is reported" {
+  mkdir "$KB/stray"
+  printf 'body\n' > "$KB/stray/thing.md"
+  run python3 "$CHECK" "$KB"
+  [ "$status" -ne 0 ]
+  [[ "$output" == *"stray: no index.md"* ]]
+}
+
+@test "an index that forgets a sibling page is reported" {
+  printf 'body\n' > "$KB/orphan.md"
+  run python3 "$CHECK" "$KB"
+  [ "$status" -ne 0 ]
+  [[ "$output" == *"does not link orphan.md"* ]]
+}
+
+@test "the quarantine trash directory is not part of the bundle" {
+  # Pages deleted from the KB wait in .AGENTTRASH/ for a pruning session with Frank.
+  # Requiring an index there, or listing its contents, would push an agent to delete
+  # the quarantined copy just to make the gate green.
+  mkdir -p "$KB/.AGENTTRASH"
+  printf 'retired page\n' > "$KB/.AGENTTRASH/old-page.md"
+  run python3 "$CHECK" "$KB"
+  [ "$status" -eq 0 ]
+  [[ "$output" == *"0 issue(s)"* ]]
+}

tests/kb-lint.bats

@@ -91,6 +91,35 @@ EOF
   [ "$status" -eq 2 ]
 }
 
+@test "a second work log in a subdirectory is reported" {
+  # One bundle, one work log. Per-directory logs are how a bundle ends up with fifty
+  # of them: the entry is never where the next agent looks, and each copy re-dates the
+  # same event on its own.
+  printf -- '---\ntype: changelog\n---\n## 2026-01-01\n- created a log\n' > "$KB/log.md"
+  printf -- '---\ntype: changelog\n---\n## 2026-01-02\n- also a log\n' > "$KB/sub/log.md"
+  run bash "$LINT" "$KB"
+  [ "$status" -ne 0 ]
+  [[ "$output" == *"one work log"*"at the bundle root"* ]]
+  [[ "$output" == *"sub/log.md"* ]]
+}
+
+@test "a work log that is not at the bundle root is reported" {
+  printf -- '---\ntype: changelog\n---\n## 2026-01-02\n- misplaced log\n' > "$KB/sub/log.md"
+  run bash "$LINT" "$KB"
+  [ "$status" -ne 0 ]
+  [[ "$output" == *"one work log"*"at the bundle root"* ]]
+}
+
+@test "the quarantine trash directory is not part of the bundle" {
+  # Deleted pages wait in .AGENTTRASH/ for a pruning session with Frank. Holding them
+  # to frontmatter and one-log rules would push an agent to delete history to go green.
+  mkdir -p "$KB/.AGENTTRASH"
+  printf 'no frontmatter, and a second log besides\n' > "$KB/.AGENTTRASH/log.md"
+  run bash "$LINT" "$KB"
+  [ "$status" -eq 0 ]
+  [[ "$output" == *"0 violation(s)"* ]]
+}
+
 @test "the shipped knowledge base itself is conformant" {
   # The tests above exercise the linter against fixtures; nothing else in the
   # suite ever points it at the real bundle, so a page added without frontmatter

tests/pcie-probe.bats

@@ -0,0 +1,144 @@
+#!/usr/bin/env bats
+# tests/pcie-probe.bats — black-box tests for scripts/pcie-probe.sh (Refs #53)
+#
+# Contract: measure host→device bandwidth on an RDNA4 box, and refuse to measure while the GPU is
+# in use. Fleet law: never benchmark beside a live service — so the guard runs BEFORE anything is
+# built or run, and the tool stops nothing and starts nothing (auto-stopping a production service is
+# the thing it must not do unasked).
+#
+# Exit status: 0 measured · 2 usage · 3 refused (GPU busy) · 4 no toolchain / build failed.
+#
+# hipcc and the compiled probes are stubbed: this box has no HIP SDK (it is a client laptop) and a
+# real measurement belongs on a machine with the cards, beside no running model.
+
+setup() {
+  TEST_TMP="$(mktemp -d)"
+  SCRIPT="$BATS_TEST_DIRNAME/../scripts/pcie-probe.sh"
+  SRC="$TEST_TMP/src"
+  BUILD="$TEST_TMP/build"
+  SYSFS="$TEST_TMP/drm"
+  BIN="$TEST_TMP/bin"
+  mkdir -p "$SRC" "$BUILD" "$BIN" "$SYSFS/card0/device" "$SYSFS/card1/device"
+
+  # Fixtures stand in for the real sysfs files the driver reads.
+  printf '8\n'            > "$SYSFS/card0/device/current_link_width"
+  printf '32.0 GT/s PCIe\n' > "$SYSFS/card0/device/current_link_speed"
+  printf '16\n'           > "$SYSFS/card0/device/max_link_width"
+  printf '32.0 GT/s PCIe\n' > "$SYSFS/card0/device/max_link_speed"
+  printf '0\n'            > "$SYSFS/card0/device/gpu_busy_percent"
+  printf '8\n'            > "$SYSFS/card1/device/current_link_width"
+  printf '32.0 GT/s PCIe\n' > "$SYSFS/card1/device/current_link_speed"
+  printf '16\n'           > "$SYSFS/card1/device/max_link_width"
+  printf '32.0 GT/s PCIe\n' > "$SYSFS/card1/device/max_link_speed"
+  printf '0\n'            > "$SYSFS/card1/device/gpu_busy_percent"
+
+  # Probe sources: the real .hip files are shipped by the script's own directory, so the fixtures
+  # only need to exist for the build step to be invoked.
+  : > "$SRC/pcie_probe.hip"; : > "$SRC/pcie_bw.hip"; : > "$SRC/hip_smoke.hip"
+
+  # Stub toolchain: records that it was called, and emits a probe binary that records that IT ran.
+  cat > "$BIN/hipcc" <<'STUB'
+#!/usr/bin/env bash
+[ "${STUB_HIPCC_FAILS:-0}" = 1 ] && { echo "stub: no matching GPU target" >&2; exit 1; }
+out=""
+while [ $# -gt 0 ]; do [ "$1" = "-o" ] && out="$2"; shift; done
+[ -n "$out" ] || exit 2
+: > "$PCIE_PROBE_BUILD/.built"
+{ echo '#!/usr/bin/env bash'
+  echo ': > "$PCIE_PROBE_BUILD/.ran"'
+  echo 'echo "PROBE RAN dev=${HIP_VISIBLE_DEVICES:-none} bin=$(basename "$0")"'
+  echo 'echo "  slab 2.344 MiB: 31.4 GB/s"'
+} > "$out"
+chmod +x "$out"
+STUB
+  cat > "$BIN/fuser" <<'STUB'
+#!/usr/bin/env bash
+[ -n "${STUB_KFD_PIDS:-}" ] && printf '%s\n' $STUB_KFD_PIDS
+exit 0
+STUB
+  chmod +x "$BIN/hipcc" "$BIN/fuser"
+
+  export PATH="$BIN:$PATH" PCIE_PROBE_SRC="$SRC" PCIE_PROBE_BUILD="$BUILD" \
+         PCIE_PROBE_SYSFS="$SYSFS" PCIE_PROBE_KFD="$TEST_TMP/kfd" PCIE_PROBE_HIPCC="$BIN/hipcc"
+  : > "$TEST_TMP/kfd"
+}
+
+teardown() { rm -rf "$TEST_TMP"; }
+
+@test "a missing HIP toolchain is a loud failure, not a silent skip" {
+  run env PCIE_PROBE_HIPCC="$TEST_TMP/nope-hipcc" "$SCRIPT"
+  [ "$status" -eq 4 ]
+  [[ "$output" == *"hip"* ]]
+  [ ! -e "$BUILD/.built" ]
+}
+
+@test "a failed build is reported as a failure" {
+  run env STUB_HIPCC_FAILS=1 "$SCRIPT"
+  [ "$status" -eq 4 ]
+  [[ "$output" == *"build"* ]]
+}
+
+@test "a GPU held by another process refuses the measurement before anything is built" {
+  # Order is the contract: build-and-then-ask would already have loaded the card beside a live
+  # service. The .built marker proves the guard ran first.
+  run env STUB_KFD_PIDS="4242" "$SCRIPT"
+  [ "$status" -eq 3 ]
+  [[ "$output" == *"busy"* ]]
+  [ ! -e "$BUILD/.built" ]
+}
+
+@test "a busy GPU percent refuses too" {
+  printf '91\n' > "$SYSFS/card0/device/gpu_busy_percent"
+  run "$SCRIPT"
+  [ "$status" -eq 3 ]
+  [[ "$output" == *"card0"* ]]
+  [ ! -e "$BUILD/.built" ]
+}
+
+@test "--force overrides the guard for a deliberately contended measurement" {
+  run env STUB_KFD_PIDS="4242" "$SCRIPT" --force
+  [ "$status" -eq 0 ]
+  [ -e "$BUILD/.ran" ]
+}
+
+@test "an idle GPU builds and runs the probe" {
+  run "$SCRIPT"
+  [ "$status" -eq 0 ]
+  [ -e "$BUILD/.built" ]
+  [ -e "$BUILD/.ran" ]
+  [[ "$output" == *"PROBE RAN"* ]]
+  [[ "$output" == *"31.4 GB/s"* ]]   # probe output passes through untouched
+}
+
+@test "--build-only compiles without touching the card" {
+  run "$SCRIPT" --build-only
+  [ "$status" -eq 0 ]
+  [ -e "$BUILD/.built" ]
+  [ ! -e "$BUILD/.ran" ]
+}
+
+@test "the link topology is reported from sysfs, current against max" {
+  run "$SCRIPT"
+  [[ "$output" == *"card0"*"x8"*"32.0 GT/s"* ]]
+  [[ "$output" == *"max x16"* ]]
+}
+
+@test "each requested device is measured separately" {
+  # One shared run cannot attribute bandwidth to a card; the whole point is per-card numbers.
+  run "$SCRIPT" --device 0 --device 1
+  [ "$status" -eq 0 ]
+  [[ "$output" == *"dev=0"* ]]
+  [[ "$output" == *"dev=1"* ]]
+}
+
+@test "no probe sources is a usage-level error, not an empty success" {
+  rm -f "$SRC"/*.hip
+  run "$SCRIPT"
+  [ "$status" -ne 0 ]
+  [[ "$output" == *"probe"* ]]
+}
+
+@test "an unknown flag is a usage error" {
+  run "$SCRIPT" --frobnicate
+  [ "$status" -eq 2 ]
+}

tests/pkg-inventory.bats

@@ -0,0 +1,223 @@
+#!/usr/bin/env bats
+# tests/pkg-inventory.bats — black-box tests for scripts/pkg-inventory.sh (Refs #51)
+#
+# Contract: `install.sh` installs desired-minus-installed from packages/*.pkgs. This tool walks
+# the other direction — installed-minus-declared — because a manifest the machine has quietly
+# outgrown cannot reproduce the machine on a rebuild. Only stdout, stderr and the exit status are
+# observed: 0 no drift, 1 drift (hand-installed packages undeclared), 2 usage, 3 sync databases
+# unavailable so repo/AUR classification is impossible.
+#
+# Every pacman/flatpak call hits a stub: nothing here may query the real package database, and a
+# real pacman on PATH would make the fixture answers depend on the workstation.
+
+setup() {
+  TEST_TMP="$(mktemp -d)"
+  SCRIPT="$BATS_TEST_DIRNAME/../scripts/pkg-inventory.sh"
+  REPO="$TEST_TMP/repo"
+  mkdir -p "$REPO/packages" "$TEST_TMP/bin"
+
+  # --- manifests: common + host(box) + aur ------------------------------------
+  cat > "$REPO/packages/common.pkgs" <<'EOF'
+# common desired state
+ghostty
+zoxide
+vlc                     # declared, deliberately NOT installed below
+EOF
+  cat > "$REPO/packages/box.pkgs" <<'EOF'
+neovim
+EOF
+  cat > "$REPO/packages/aur.pkgs" <<'EOF'
+typora          # AUR-only desired state
+EOF
+
+  # --- pacman log: install day 2026-01-01, hand installs from 2026-03 ----------
+  cat > "$TEST_TMP/pacman.log" <<'EOF'
+[2026-01-01T10:00:00-0800] [PACMAN] Running 'pacman --sysroot /tmp/calamares-root-x -S base'
+[2026-01-01T10:00:01-0800] [ALPM] installed filesystem (2026.01.01-1)
+[2026-01-01T10:00:02-0800] [ALPM] installed base (3-1)
+[2026-01-01T10:00:03-0800] [ALPM] installed libfoo (1.0-1)
+[2026-03-04T09:00:00-0800] [ALPM] installed bun (1.2-1)
+[2026-03-04T09:30:00-0800] [ALPM] upgraded filesystem (2026.01.01-1 -> 2026.03.01-1)
+[2026-03-05T09:00:00-0800] [ALPM] installed nirimod-git (r7-1)
+[2026-03-06T09:00:00-0800] [ALPM] removed base (3-1)
+EOF
+
+  # --- installed state --------------------------------------------------------
+  # ghostty/zoxide/neovim/typora declared. libfoo: explicit, arrived with the installer.
+  # bun/nirimod-git: installed by hand afterwards, undeclared. python-hatchling: orphan.
+  printf '%s\n' base bun filesystem ghostty libfoo neovim nirimod-git typora zoxide > "$TEST_TMP/local-all"
+  printf '%s\n' bun ghostty libfoo neovim nirimod-git typora zoxide > "$TEST_TMP/local-explicit"
+  printf '%s\n' python-hatchling > "$TEST_TMP/orphans"
+  # nirimod-git is deliberately ABSENT here: no sync db can serve it, which is the fact that
+  # routes it to aur.pkgs in the test below.
+  printf '%s\n' bun ghostty neovim typora zoxide libfoo vlc python-hatchling base filesystem > "$TEST_TMP/sync-all"
+
+  # Four flag combinations are the script's whole interface to the package manager; the stub
+  # answers those and refuses anything else, so an accidental new query fails loudly.
+  cat > "$TEST_TMP/bin/pacman" <<'STUB'
+#!/usr/bin/env bash
+case "$1" in
+  -Sl)   [ "${STUB_SYNC_EMPTY:-0}" = 1 ] && exit 1
+         sed 's/^/syncdb /' "$SYNC_ALL" ;;
+  -Qqe)  cat "$LOCAL_EXPLICIT" ;;
+  -Qtdq) cat "$ORPHANS"; [ -s "$ORPHANS" ] ;;
+  -Qq)   cat "$LOCAL_ALL" ;;
+  *)     echo "stub pacman: unhandled args: $*" >&2; exit 64 ;;
+esac
+STUB
+  cat > "$TEST_TMP/bin/flatpak" <<'STUB'
+#!/usr/bin/env bash
+[ "${STUB_NO_FLATPAK:-0}" = 1 ] && exit 127
+printf '%s\n' com.discordapp.Discord
+STUB
+  chmod +x "$TEST_TMP/bin/pacman" "$TEST_TMP/bin/flatpak"
+
+  export PATH="$TEST_TMP/bin:$PATH"
+  export PKGINV_REPO="$REPO" PKGINV_HOST=box PKGINV_LOG="$TEST_TMP/pacman.log"
+  export LOCAL_ALL="$TEST_TMP/local-all" LOCAL_EXPLICIT="$TEST_TMP/local-explicit"
+  export ORPHANS="$TEST_TMP/orphans" SYNC_ALL="$TEST_TMP/sync-all"
+}
+
+teardown() { rm -rf "$TEST_TMP"; }
+
+# section RE_START RE_END — the report from RE_START's line up to (not including) RE_END, so an
+# assertion proves a name landed in a specific section instead of merely appearing somewhere in the
+# report. Start inclusive (the count and the names sit on the label line), terminator exclusive (a
+# plain sed range would leak the next section's first line). Anchoring matters: an unanchored start
+# runs the range to end-of-output, silently turning every absence assertion into a vacuous pass —
+# exactly how four of these tests were passing before this helper was fixed.
+section() { printf '%s\n' "$output" | awk -v s="$1" -v e="$2" '$0 ~ e {on=0} $0 ~ s {on=1} on'; }
+ADDITIONS() { section "^undeclared additions" "^installer-provided"; }
+
+@test "header names the host and takes the baseline from the oldest install line" {
+  run "$SCRIPT"
+  [ "$status" -eq 1 ]   # the fixture has drift by design
+  [[ "$output" == *"pkg-inventory host=box"* ]]
+  [[ "$output" == *"baseline=2026-01-01"* ]]
+}
+
+@test "hand-installed packages are reported as additions" {
+  run "$SCRIPT"
+  [[ "$output" == *"undeclared additions (declare these): 2"* ]]
+  s="$(ADDITIONS)"
+  [[ "$s" == *bun* ]]
+  [[ "$s" == *nirimod-git* ]]
+}
+
+@test "a package the installer provided is not reported as an addition" {
+  run "$SCRIPT"
+  additions="$(ADDITIONS)"
+  [[ "$additions" != *libfoo* ]]
+  [[ "$(section "^installer-provided" "^declared,")" == *libfoo* ]]
+  # The folded block must end in a newline. Without one, the following label is glued onto the
+  # last folded line and every section after it vanishes from a sliced report.
+  [[ "$(section "^installer-provided" "^declared,")" != *declared,* ]]
+}
+
+@test "AUR-only packages are separated from sync-repo packages" {
+  run "$SCRIPT"
+  # nirimod-git is missing from the sync-DB fixture, so only a helper can install it: it must be
+  # routed to aur.pkgs, not to a pacman line that would fail on a fresh box. Bash `*` crosses
+  # newlines, so the absence check runs on one line rather than on the whole section.
+  repo_line="$(section '^  repo ' '^  aur ')"
+  [[ "$repo_line" == *"repo (sync dbs): bun"* ]]
+  [[ "$repo_line" != *nirimod-git* ]]
+  [[ "$(section '^  aur ' '^installer-provided')" == *"aur (needs a helper): nirimod-git"* ]]
+}
+
+@test "declared-but-missing packages are listed for install.sh" {
+  run "$SCRIPT"
+  [[ "$output" == *"declared, not installed"* ]]
+  [[ "$(section "^declared," "^orphans")" == *vlc* ]]
+}
+
+@test "orphans are reported as ignored and never emitted" {
+  run "$SCRIPT"
+  [[ "$output" == *orphans*python-hatchling* ]]
+  run "$SCRIPT" --emit
+  [[ "$output" != *python-hatchling* ]]
+}
+
+@test "--baseline moves packages installed on that date into the installer set" {
+  # Inclusive date semantics: pushing the baseline to bun's install date makes bun installer
+  # furniture, while nirimod-git (the next day) is still a hand install.
+  run env PKGINV_BASELINE=2026-03-04 "$SCRIPT"
+  [[ "$output" == *"baseline=2026-03-04"* ]]
+  s="$(ADDITIONS)"
+  [[ "$s" != *bun* ]]
+  [[ "$s" == *nirimod-git* ]]
+}
+
+@test "--emit prints lines that survive the manifest parser" {
+  run "$SCRIPT" --emit
+  [ "$status" -eq 0 ]
+  # install.sh reads manifests as `sed 's/#.*//'` then the first field, so an emitted name must
+  # be a bare token: a stray path or trailing note would be handed to pacman as a package name.
+  bad="$(printf '%s\n' "$output" | grep -v '^#' | grep -vE '^[A-Za-z0-9@._+-]+$' || true)"
+  [ -z "$bad" ]
+  printf '%s\n' "$output" > "$REPO/packages/emitted.pkgs"
+  names="$(sed 's/#.*//' "$REPO/packages/emitted.pkgs" | awk '{if ($1) print $1}' | sort | tr '\n' ' ')"
+  [[ "$names" == *bun* ]]
+  [[ "$names" == *nirimod-git* ]]
+  [[ "$names" != *ghostty* ]]
+  [[ "$names" != *libfoo* ]]
+  [[ "$names" != *vlc* ]]
+}
+
+@test "an unknown host gets the common manifest only, so host packages look undeclared" {
+  # Mirrors install.sh: wrong-host runs are a no-op, not a hazard. Here that means neovim,
+  # declared only in box.pkgs, counts as an addition when the host is not box.
+  run env PKGINV_HOST=otherbox "$SCRIPT"
+  [[ "$(ADDITIONS)" == *neovim* ]]
+}
+
+@test "no drift exits 0" {
+  printf '%s\n' ghostty libfoo zoxide > "$TEST_TMP/local-explicit"
+  run "$SCRIPT"
+  [ "$status" -eq 0 ]
+  [[ "$output" == *"undeclared additions (declare these): 0"* ]]
+}
+
+@test "missing sync databases fail loudly rather than misclassifying everything as AUR" {
+  run env STUB_SYNC_EMPTY=1 "$SCRIPT"
+  [ "$status" -eq 3 ]
+  [[ "$output" == *"sync"* ]]
+}
+
+@test "flatpak apps are reported separately from pacman packages" {
+  run "$SCRIPT"
+  [[ "$output" == *"flatpak"*com.discordapp.Discord* ]]
+}
+
+@test "a box without flatpak still reports the pacman inventory" {
+  run env STUB_NO_FLATPAK=1 "$SCRIPT"
+  [ "$status" -eq 1 ]
+  [[ "$output" == *"flatpak"* ]]
+  [[ "$(ADDITIONS)" == *bun* ]]
+}
+
+@test "the baseline is found in a rotated log when the install day has aged out of the live one" {
+  # pacman rotates its log; without reading the rotated file the whole base system would be
+  # reported as hand-installed additions on any machine older than the rotation window.
+  mv "$TEST_TMP/pacman.log" "$TEST_TMP/pacman.log.1"
+  printf '[2026-10-01T09:00:00-0700] [ALPM] upgraded zoxide (0.9-1 -> 0.10-1)\n' > "$TEST_TMP/pacman.log"
+  run env PKGINV_LOG="$TEST_TMP/pacman.log $TEST_TMP/pacman.log.1" "$SCRIPT"
+  [[ "$output" == *"baseline=2026-01-01"* ]]
+  [[ "$(ADDITIONS)" != *libfoo* ]]
+}
+
+@test "a log larger than the pipe buffer still yields the baseline" {
+  # A real install day writes thousands of install lines. `sort | head -1` under pipefail dies of
+  # SIGPIPE once that output exceeds the pipe buffer, and no small fixture can show it — the first
+  # run against a real log is where it surfaced. seq, not yes: yes would SIGPIPE in the fixture.
+  seq 1 20000 | awk '{print "[2025-05-05T10:00:00-0700] [ALPM] installed pkgfiller (1-1)"}' > "$TEST_TMP/big.log"
+  cat "$TEST_TMP/big.log" "$TEST_TMP/pacman.log" > "$TEST_TMP/combined.log"
+  run env PKGINV_LOG="$TEST_TMP/combined.log" "$SCRIPT"
+  [ "$status" -eq 1 ]
+  [[ "$output" == *"baseline=2025-05-05"* ]]
+}
+
+@test "usage is a distinct exit status from drift" {
+  run "$SCRIPT" --nope
+  [ "$status" -eq 2 ]
+}

tests/remote-job.bats

@@ -0,0 +1,135 @@
+#!/usr/bin/env bats
+# tests/remote-job.bats — black-box tests for scripts/remote-job.sh (Refs #53)
+#
+# Contract: a job runs detached, writes its output, then its exit code, then touches .done LAST.
+# Status is then a cheap independent read that survives the session that started the job — the
+# whole point is replacing `ssh host 'tail -f | sed'`, which reported success on jobs that had not
+# finished. Exit status answers "is everything finished"; the rc= field answers "did it work".
+#
+# Jobs really run here, against a temp job dir. No fake filesystem state is pre-seeded, because a
+# fixture that pre-creates .done proves nothing about the code that is supposed to create it.
+
+setup() {
+  TEST_TMP="$(mktemp -d)"
+  SCRIPT="$BATS_TEST_DIRNAME/../scripts/remote-job.sh"
+  export REMOTE_JOBS_DIR="$TEST_TMP/jobs"
+}
+
+teardown() {
+  # Jobs are detached on purpose; leave nothing behind that could outlive the test run.
+  pkill -P 1 -f "$TEST_TMP" 2>/dev/null || true
+  rm -rf "$TEST_TMP"
+}
+
+# until_done NAME SECONDS — poll instead of sleeping a fixed amount, so the suite is neither slow
+# nor flaky on a loaded machine.
+until_done() {
+  local name="$1" limit="${2:-10}" waited=0
+  while [[ ! -e "$REMOTE_JOBS_DIR/$name.done" && $waited -lt $((limit * 10)) ]]; do
+    sleep 0.1; waited=$((waited + 1))
+  done
+  [[ -e "$REMOTE_JOBS_DIR/$name.done" ]]
+}
+
+@test "start returns immediately while the job is still running" {
+  run timeout 10 "$SCRIPT" start slow -- sleep 2
+  [ "$status" -eq 0 ]
+  [[ "$output" == "started slow" ]]
+  # A 2-second job must not have blocked a start that is supposed to return at once, and while it
+  # is still in flight the report must say unfinished — never DONE.
+  run "$SCRIPT" status slow
+  [[ "$output" == *RUN* || "$output" == *PENDING* ]]
+  [ "$status" -eq 1 ]
+}
+
+@test "a successful job is reported DONE with its output" {
+  "$SCRIPT" start ok -- bash -c 'echo marker-4711'
+  until_done ok
+  run "$SCRIPT" status ok
+  [[ "$output" == *"ok"*DONE*rc=0* ]]
+  [ "$status" -eq 0 ]
+  run "$SCRIPT" out ok
+  [[ "$output" == *marker-4711* ]]
+}
+
+@test "a failing job's exit code survives into the report" {
+  # This is the reason the .rc file exists: a supervisor that cannot see the failure code is the
+  # bug the runner was written to fix.
+  "$SCRIPT" start boom -- bash -c 'echo it failed here >&2; exit 7'
+  until_done boom
+  run "$SCRIPT" status boom
+  [[ "$output" == *"boom"*DONE*rc=7* ]]
+  run "$SCRIPT" out boom
+  [[ "$output" == *"it failed here"* ]]
+}
+
+@test "the .done sentinel is never written before the exit code" {
+  # If .done landed first, a waiter could read an empty rc and call the job successful.
+  "$SCRIPT" start order -- bash -c 'echo x'
+  until_done order
+  [ -f "$REMOTE_JOBS_DIR/order.rc" ]
+  [ -s "$REMOTE_JOBS_DIR/order.rc" ]
+  run cat "$REMOTE_JOBS_DIR/order.rc"
+  [[ "$output" =~ ^[0-9]+$ ]]
+}
+
+@test "wait prints DONE with the exit code and a tail of the output" {
+  "$SCRIPT" start fin -- bash -c 'echo one; echo two'
+  run "$SCRIPT" wait fin 15
+  [ "$status" -eq 0 ]
+  [[ "$output" == *"DONE fin rc=0"* ]]
+  [[ "$output" == *two* ]]
+}
+
+@test "wait gives up on its own and says so" {
+  "$SCRIPT" start never -- sleep 30
+  run "$SCRIPT" wait never 1
+  [ "$status" -eq 1 ]
+  [[ "$output" == *TIMEOUT*never* ]]
+  "$SCRIPT" status never | grep -q .   # the job is still there, unfinished
+}
+
+@test "status distinguishes running from pending from done" {
+  run "$SCRIPT" status
+  [[ "$output" == *"(no jobs)"* ]]
+  [ "$status" -eq 0 ]
+
+  "$SCRIPT" start later -- sleep 3
+  run "$SCRIPT" status later
+  [[ "$output" == *later* ]]
+  [[ "$output" == *RUN* || "$output" == *PENDING* ]]
+  [ "$status" -eq 1 ]   # unfinished: a supervisor must be able to branch on this
+}
+
+@test "two jobs in flight keep separate state" {
+  "$SCRIPT" start a -- bash -c 'echo A; exit 0'
+  "$SCRIPT" start b -- bash -c 'echo B; exit 2'
+  until_done a && until_done b
+  run "$SCRIPT" status
+  [[ "$output" == *"a"*DONE*rc=0* ]]
+  [[ "$output" == *"b"*DONE*rc=2* ]]
+  run "$SCRIPT" out a
+  [[ "$output" == A ]]
+  run "$SCRIPT" out b
+  [[ "$output" == B ]]
+}
+
+@test "out honours a line limit" {
+  "$SCRIPT" start many -- bash -c 'seq 1 40'
+  until_done many
+  run "$SCRIPT" out many 3
+  [ "$(printf '%s\n' "$output" | grep -c .)" -eq 3 ]
+  [[ "$output" == *38* ]]   # the tail, not the head
+}
+
+@test "an unknown verb is a usage error" {
+  run "$SCRIPT" frobnicate
+  [ "$status" -eq 2 ]
+  [[ "$output" == *usage* ]]
+}
+
+@test "the job directory is created on first use" {
+  [ ! -d "$REMOTE_JOBS_DIR" ]
+  "$SCRIPT" status
+  [ -d "$REMOTE_JOBS_DIR" ]
+}