serverAppConfigs/tests/observability_quadlet.bats

#!/usr/bin/env bats
# Seam: the five observability Quadlet units on dankclaw.
#
# prometheus, grafana, loki, alloy and node-exporter ran as compose services
# until 2026-09-11 and did not survive a reboot — the 2026-09-11 reboot for the
# amd_iommu=off change is what exposed it. They are rootless Quadlet units now.
# This seam pins the properties a reader cannot check by eye:
#
#   * boot persistence and self-healing on every unit;
#   * the published ports bind 127.0.0.1 and never a wildcard address, so no
#     unauthenticated metrics/dashboard/log endpoint is reachable off-host —
#     the whole point of moving them off compose, which published on 0.0.0.0;
#   * every port that IS published has a named consumer (the host-side homepage
#     status timer, or Prometheus scraping the host);
#   * the container names still match what Caddy proxies to and what
#     Prometheus' own scrape config targets, so the cutover broke no wiring;
#   * the deployer installs, restarts and health-checks them, and never tries
#     to `enable` a generated unit.

load helpers

UNIT_DIR="$REPO_ROOT/dankclaw/observability/quadlet"
REMOTE_DEPLOY="$REPO_ROOT/scripts/deploy-remote.sh"
UNITS=(prometheus grafana loki alloy node-exporter)

# container_section <unit> — the [Container] key/value block only
container_section() {
    awk '/^\[Container\]/{f=1;next} /^\[/{f=0} f' "$1"
}

# service_section <unit> — the [Service] key/value block only
service_section() {
    awk '/^\[Service\]/{f=1;next} /^\[/{f=0} f' "$1"
}

@test "all five observability units exist under dankclaw/observability/quadlet/" {
    local svc
    for svc in "${UNITS[@]}"; do
        [ -f "$UNIT_DIR/$svc.container" ] || { echo "missing $svc.container"; return 1; }
    done
}

@test "every observability unit is boot-persistent" {
    # Generated units cannot be enabled on this host's podman 5.x v1 quadlet
    # generator; [Install] + linger is the entire boot-persistence story.
    local svc
    for svc in "${UNITS[@]}"; do
        grep -q '^WantedBy=default.target$' "$UNIT_DIR/$svc.container" \
            || { echo "$svc is not boot-persistent"; return 1; }
    done
}

@test "every observability unit is self-healing" {
    local svc
    for svc in "${UNITS[@]}"; do
        grep -q '^Restart=always$' "$UNIT_DIR/$svc.container" \
            || { echo "$svc has no Restart policy"; return 1; }
        grep -q '^RestartSec=' "$UNIT_DIR/$svc.container" \
            || { echo "$svc has no RestartSec"; return 1; }
    done
}

@test "no observability unit publishes on a wildcard address" {
    # The compose services published 9090, 3002 and 3100 on 0.0.0.0 with no
    # authentication of any kind. Anything reachable off-host must go through
    # the guarded franksdank.cloud vhosts instead.
    local svc
    for svc in "${UNITS[@]}"; do
        ! grep -qE '^PublishPort=(0\.0\.0\.0|:)' "$UNIT_DIR/$svc.container" \
            || { echo "$svc publishes on a wildcard address"; return 1; }
    done
    ! grep -qE '^PublishPort=' "$UNIT_DIR/alloy.container" || true
}

@test "the three HTTP UIs publish on loopback only" {
    grep -q '^PublishPort=127.0.0.1:9090:9090$' "$UNIT_DIR/prometheus.container"
    grep -q '^PublishPort=127.0.0.1:3002:3000$' "$UNIT_DIR/grafana.container"
    grep -q '^PublishPort=127.0.0.1:3100:3100$' "$UNIT_DIR/loki.container"
}

@test "the homepage status timer's probe targets are the published loopback ports" {
    # scripts/homepage-status.py runs on the host and probes the `probe` field
    # of services.json from there, so a probe and a published port that
    # disagree show the card as down forever.
    local registry="$REPO_ROOT/shared/homepage/services.json"
    grep -q '"probe": "127.0.0.1:9090"' "$registry"
    grep -q '"probe": "127.0.0.1:3002"' "$registry"
    grep -q '"probe": "127.0.0.1:3100"' "$registry"
    grep -q '"probe": "127.0.0.1:9100"' "$registry"
    grep -q '"probe": "127.0.0.1:12345"' "$registry"
}

@test "node-exporter binds the host namespace and both of its consumers" {
    # It reports the host's own interfaces/cgroups, so it needs the host netns
    # and host PID namespace; and it must listen exactly where its two
    # consumers are: the homepage timer on loopback, Prometheus (in a
    # container) on the LAN address.
    local unit="$UNIT_DIR/node-exporter.container"
    grep -q '^Network=host$' "$unit"
    grep -q -- '--pid=host' "$unit"
    grep -q -- '--web.listen-address=127.0.0.1:9100' "$unit"
    grep -q -- '--web.listen-address=192.168.0.143:9100' "$unit"
    ! grep -qE '^PublishPort=' "$unit"
}

@test "prometheus scrapes node-exporter where node-exporter actually listens" {
    # Cross-file contract: if either side's address changes alone, host metrics
    # silently stop with no error anywhere.
    local unit="$UNIT_DIR/node-exporter.container"
    local cfg="$REPO_ROOT/shared/prometheus/prometheus.yml"
    local addr
    addr=$(grep -oE '192\.168\.0\.[0-9]+:9100' "$unit" | head -1)
    [ -n "$addr" ] || { echo "node-exporter has no LAN listen address"; return 1; }
    grep -q "\"$addr\"" "$cfg" || { echo "prometheus does not scrape $addr"; return 1; }
}

@test "container names still match what Caddy and Prometheus address by name" {
    # Caddy's post-auth handlers proxy to prometheus:9090 / grafana:3000 /
    # loki:3100 on the shared network, and Prometheus scrapes grafana:3000 and
    # loki:3100 the same way. A renamed container breaks all of it silently.
    grep -qE '^[[:space:]]*@grafana host grafana\.franksdank\.cloud$' "$REPO_ROOT/dankclaw/Caddyfile"
    grep -q 'reverse_proxy grafana:3000' "$REPO_ROOT/dankclaw/Caddyfile"
    grep -q 'reverse_proxy prometheus:9090' "$REPO_ROOT/dankclaw/Caddyfile"
    grep -q 'reverse_proxy loki:3100' "$REPO_ROOT/dankclaw/Caddyfile"
    local svc
    for svc in prometheus grafana loki alloy; do
        grep -q "^ContainerName=$svc$" "$UNIT_DIR/$svc.container" \
            || { echo "$svc unit renames its container"; return 1; }
        grep -q '^Network=dankclaw_default$' "$UNIT_DIR/$svc.container" \
            || { echo "$svc is not on the network Caddy and its peers use"; return 1; }
    done
    grep -q '"grafana:3000"' "$REPO_ROOT/shared/prometheus/prometheus.yml"
    grep -q '"loki:3100"' "$REPO_ROOT/shared/prometheus/prometheus.yml"
    grep -q 'url = "http://loki:3100/loki/api/v1/push"' "$REPO_ROOT/shared/alloy/config.alloy"
}

@test "every observability unit has a health check" {
    # A unit without one shows as plainly "Up" in podman ps while its process
    # is wedged, and the deploy has nothing to wait on.
    local svc
    for svc in "${UNITS[@]}"; do
        grep -q '^HealthCmd=' "$UNIT_DIR/$svc.container" \
            || { echo "$svc has no HealthCmd"; return 1; }
        grep -q '^HealthRetries=' "$UNIT_DIR/$svc.container" \
            || { echo "$svc has no HealthRetries"; return 1; }
    done
}

@test "grafana receives the OAuth client secret without receiving the whole .env" {
    # systemd expands ${GRAFANA_OAUTH_CLIENT_SECRET} in [Container] from the
    # [Service] EnvironmentFile. Putting that file in [Container] would hand
    # the container every fleet secret in it (Porkbun keys, Authentik keys,
    # the sudo password file's neighbours) for the sake of one value.
    local unit="$UNIT_DIR/grafana.container"
    service_section "$unit" | grep -q '^EnvironmentFile=/home/dank/serverAppConfigs/.env$'
    ! container_section "$unit" | grep -q '^EnvironmentFile='
    container_section "$unit" | grep -q '^Environment=GF_AUTH_GENERIC_OAUTH_CLIENT_SECRET=\${GRAFANA_OAUTH_CLIENT_SECRET}$'
}

@test "observability units hold no literal secret material" {
    # A secret-named setting is allowed only when its value is a ${VAR}
    # reference resolved from an EnvironmentFile systemd reads; a literal value
    # would be a tracked credential. Keys that merely mention a secret word
    # (GF_AUTH_GENERIC_OAUTH_TOKEN_URL, ..._CLIENT_ID) are not secrets, so the
    # match is anchored to the end of the key.
    local svc unit line key value
    for svc in "${UNITS[@]}"; do
        unit="$UNIT_DIR/$svc.container"
        while IFS= read -r line; do
            key="${line#Environment=}"
            value="${key#*=}"
            key="${key%%=*}"
            case "$key" in
                *_SECRET|*_PASSWORD|*_TOKEN|*_API_KEY)
                    case "$value" in
                        '${'*) ;;
                        *) echo "$svc hardcodes a literal secret in $key"; return 1 ;;
                    esac
                    ;;
            esac
        done < <(container_section "$unit" | grep '^Environment=')
        ! container_section "$unit" | grep -q '^EnvironmentFile=' \
            || { echo "$svc passes a whole env file into the container"; return 1; }
    done
}

@test "startup order follows the data dependencies" {
    # Grafana is useless without Prometheus and Alloy drops logs without Loki;
    # both pairs are expressed as systemd ordering, not launch luck.
    grep -q 'After=network-online.target prometheus.service' "$UNIT_DIR/grafana.container"
    grep -q 'Wants=network-online.target prometheus.service' "$UNIT_DIR/grafana.container"
    grep -q 'After=network-online.target loki.service' "$UNIT_DIR/alloy.container"
    grep -q 'Wants=network-online.target loki.service' "$UNIT_DIR/alloy.container"
}

@test "the deployer installs, restarts and health-checks each unit" {
    grep -q '^deploy_observability() {' "$REMOTE_DEPLOY"
    grep -q 'install_quadlet observability dankclaw/observability/quadlet "$service"' "$REMOTE_DEPLOY"
    grep -q 'systemctl --user restart "$service.service"' "$REMOTE_DEPLOY"
    local svc url
    while read -r svc url; do
        grep -q "wait_for_health $svc $url" "$REMOTE_DEPLOY" \
            || { echo "no health wait for $svc at $url"; return 1; }
    done <<'PAIRS'
prometheus http://127.0.0.1:9090/-/healthy
grafana http://127.0.0.1:3002/api/health
loki http://127.0.0.1:3100/ready
alloy http://127.0.0.1:12345/-/healthy
node-exporter http://127.0.0.1:9100/metrics
PAIRS
}

@test "the deployer never enables a generated unit" {
    # `systemctl --user enable X` fails on this host ("transient or generated").
    ! grep -q 'systemctl --user enable prometheus.service\|systemctl --user enable grafana.service\|systemctl --user enable loki.service\|systemctl --user enable alloy.service\|systemctl --user enable node-exporter.service' "$REMOTE_DEPLOY"
}

@test "the deployer rebuilds the locally built images before restarting them" {
    # loki and alloy are franksdank/<svc>:latest built from this repo; a unit
    # change that skipped the build would restart the previous image.
    grep -q 'build_compose_image loki' "$REMOTE_DEPLOY"
    grep -q 'build_compose_image alloy' "$REMOTE_DEPLOY"
}

@test "the five are no longer compose services" {
    # Two owners for one container name is how a compose run resurrects a
    # stale duplicate next to the quadlet-managed one.
    local svc
    for svc in "${UNITS[@]}"; do
        ! services_in "$REPO_ROOT/dankclaw/compose.yaml" | grep -qx "$svc" \
            || { echo "$svc is still a compose service"; return 1; }
    done
}

@test "changes under dankclaw/observability/ run this seam" {
    run "$REPO_ROOT/scripts/test-changed.sh" --list \
        --paths dankclaw/observability/quadlet/prometheus.container
    [ "$status" -eq 0 ]
    echo "$output" | grep -q 'tests/observability_quadlet.bats'
}

@test "the planner routes each unit to its own service" {
    local svc
    for svc in "${UNITS[@]}"; do
        run python3 "$REPO_ROOT/scripts/deploy-plan.py" --target dankclaw \
            --paths "dankclaw/observability/quadlet/$svc.container"
        [ "$status" -eq 0 ]
        [ "$output" = "$svc" ] || { echo "$svc planned as '$output'"; return 1; }
    done
}