dankclaw/voiceservice/quadlet/frank-tts.container

@@ -9,9 +9,9 @@
 # /home/dank/voices holding reference.wav; the shim refuses any name without
 # one (400 + the list that does exist) rather than narrating in a fallback
 # voice nobody chose. The engine behind it is a separate decision —
-# TTS_BACKEND in scripts/frank-tts.env picks between forwarding to an
-# OpenAI-shaped upstream on host :8880 and running a local CLI binary per
-# request.
+# TTS_BACKEND in scripts/frank-tts.env picks between forwarding to the
+# OpenAI-shaped engine (`frank-tts-engine`, [[Frank TTS Engine]]) and running a
+# local CLI binary per request.
 #
 # IMAGE. Built locally from dankclaw/voiceservice/Containerfile by
 # deploy-remote.sh (build_compose_image), like loki/alloy: python 3.12-alpine
@@ -19,16 +19,26 @@
 # Pull=never and the localhost/ prefix are required — this host's quadlet
 # path cannot resolve a locally built tag from local storage otherwise.
 #
-# NETWORK. Bridge (dankclaw_default), NOT host: nothing here needs a shared
-# loopback namespace, and the comfyui/loki/authentik units are bridge too.
-# Consequences both ways: consumers reach it on the published 7772, and the
-# shim reaches the host-side TTS engine through host.containers.internal
-# (never the LAN IP — a bridge netns cannot route to the host's own address
-# for every bind shape, and the fleet's law is the gateway name). NOTE for
-# whoever starts the :8880 engine: host.containers.internal reaches the host
-# network namespace, so the engine must bind an address that namespace
-# accepts; a 127.0.0.1-only bind is not it (the 2026-09-17 signal-relay hop
-# needed the host LAN bind for the same reason).
+# NETWORK. TWO attached networks, and the order is the one the open-notebook
+# pair uses: `dankclaw_default` first (the default route, and where consumers
+# live — they reach the published 7772, and open-notebook dials
+# `http://frank-tts:7772/v1` by container name), then the voice pair's private
+# bridge, `frank-tts-engine.network`, where the arm A engine lives. The shim's
+# upstream is therefore the engine's container DNS name
+# (`http://frank-tts-engine:8880`, scripts/frank-tts.env) and NOT
+# host.containers.internal: netavark DNATs published ports only, so a bridge
+# container cannot reach a host-loopback bind — the shape that 502'd hermes —
+# and the engine publishes nothing at all. That file MUST be installed beside
+# this unit (the engine's handler does it; the façade handler re-installs it for
+# `--only frank-tts`), because with a referenced Network= file missing the v1
+# generator refuses to produce this container unit at all.
+#
+# ORDERING. Wants+After on frank-tts-engine.service, not Requires: the façade
+# has a second backend (`TTS_BACKEND=llama-tts-cli`) that needs no upstream, and
+# an engine that will not start must not take this endpoint's unit down with it.
+# When both boot, this comes up after the engine, whose ExecStartPost warm pass
+# is part of its start — so the first request of the day meets a warm voice
+# registry instead of paying the 5.5 s cold decode.
 #
 # VOICES. /home/dank/voices is host state, never repo state, and is mounted
 # READ-ONLY: this endpoint has no business writing voice packs. Because the
@@ -41,14 +51,16 @@
 # carries them deliberately.
 [Unit]
 Description=frank-tts (cloned-voice OpenAI-compatible TTS facade)
-After=network-online.target
+After=network-online.target frank-tts-engine.service
 Wants=network-online.target
+Wants=frank-tts-engine.service
 
 [Container]
 ContainerName=frank-tts
 Image=localhost/franksdank/frank-tts:latest
 Pull=never
 Network=dankclaw_default
+Network=frank-tts-engine.network
 PublishPort=7772:7772
 EnvironmentFile=/home/dank/serverAppConfigs/scripts/frank-tts.env
 Volume=/home/dank/voices:/voices:ro

scripts/deploy-plan.py

@@ -66,6 +66,7 @@ SERVICE_ORDER = (
     # a dependency of the 7772 facade, so it is planned (and therefore
     # restarted) first.
     "frank-tts-engine",
+    "frank-tts",
     "frank-dragoon",
     "frank-zealot",
     "frank-archon",
@@ -102,6 +103,7 @@ DANKCLAW_SERVICES = {
     "frank-dragoon",
     "frank-zealot",
     "frank-tts-engine",
+    "frank-tts",
 }
 
 DANKSERVER_SERVICES = {
@@ -342,6 +344,15 @@ def services_for_path(path: str, target: str) -> set[str]:
                              "Containerfile.engine", "tts-engine-start.sh",
                              "tts-engine-warm.sh"}:
                 _add(services, "frank-tts-engine")
+            # The 7772 façade is the other deployable in this directory. The
+            # bridge file is named after the ENGINE unit (install_quadlet copies
+            # `$unit.network` beside `$unit.container`), yet both units attach
+            # to it, so a subnet change is a change to both. Anything else here
+            # belongs to neither deployable and plans nothing.
+            if parts[-1] in {"frank-tts.container", "app.py", "Containerfile"}:
+                _add(services, "frank-tts")
+            if parts[-1] == "frank-tts-engine.network":
+                _add(services, "frank-tts")
             return services
         # frank-dragoon left the quadlet shape on 2026-09-19 (CIRU v4.4.1 host
         # build, root unit): its files live in scripts/ and map there.

scripts/deploy-remote.sh

@@ -92,7 +92,7 @@ service_is_allowed() {
         dankclaw:caddy|dankclaw:homepage|dankclaw:seerr|dankclaw:marreta|\
         dankclaw:open-notebook|\
         dankclaw:frank-dragoon|dankclaw:frank-zealot|\
-        dankclaw:frank-tts-engine|\
+        dankclaw:frank-tts-engine|dankclaw:frank-tts|\
         dankserver:romm-mariadb|dankserver:romm-redis|dankserver:romm|\
         dankserver:copyparty|dankserver:jellyfin|dankserver:calibre-web|dankserver:calibre-server|dankserver:plex|dankserver:tautulli|\
         dankserver:prowlarr|dankserver:qbittorrent|dankserver:radarr|\
@@ -550,6 +550,14 @@ build_compose_image() {
             image="franksdank/$service:latest"
             containerfile="dankclaw/$service/Containerfile"
             ;;
+        frank-tts)
+            # The 7772 façade: stdlib python + ffmpeg, app.py copied in. Listed
+            # explicitly because build_compose_image's `*)` arm returns 0 — an
+            # unlisted service builds nothing and the unit's Pull=never then
+            # fails on a tag that was never made.
+            image=franksdank/frank-tts:latest
+            containerfile=dankclaw/voiceservice/Containerfile
+            ;;
         frank-tts-engine)
             # The arm A TTS engine (qwentts.cpp `tts-server`). Built from
             # source at a pinned upstream commit, so the build needs network
@@ -801,6 +809,43 @@ deploy_frank_tts_engine() {
     podman exec frank-tts-engine /app/warm-voices.sh
 }
 
+deploy_frank_tts() {
+    # The 7772 façade in front of frank-tts-engine. Weights and the engine build
+    # are not this handler's business, but the BRIDGE FILE is: this unit
+    # references frank-tts-engine.network, and with a referenced Network= file
+    # absent the v1 generator refuses to produce the container unit at all. So
+    # `--only frank-tts` installs the engine's quadlet pair too — idempotent, and
+    # it is what makes the façade deployable on a host where the engine was
+    # planned separately or not at all.
+    #
+    # The voice packs are host state (the pack builder writes them), but the
+    # directory is created here as the deploy user on purpose: rootless podman
+    # would otherwise auto-create a missing bind source as root-owned, and the
+    # container runs as uid 10000.
+    mkdir -p /home/dank/voices
+
+    build_compose_image frank-tts
+    install_quadlet frank-tts-engine dankclaw/voiceservice/quadlet frank-tts-engine
+    install_quadlet frank-tts dankclaw/voiceservice/quadlet frank-tts
+    systemctl --user start frank-tts-engine-network.service
+
+    # No `systemctl --user enable` (generated Quadlet units cannot be enabled on
+    # this host); boot persistence is the [Install] section in each unit. The
+    # façade unit carries Wants=/After= on frank-tts-engine.service, so this
+    # restart pulls the engine — and its ExecStartPost warm pass — ahead of it:
+    # an engine that will not start delays this gate instead of taking the
+    # endpoint down with it.
+    systemctl --user restart frank-tts.service
+    # The gate is podman's recorded health, driven by the unit's own HealthCmd
+    # (`wget --spider -q http://127.0.0.1:7772/health`, inside the container's
+    # namespace). /health answers 200 with the backend name and the resolved
+    # voice list, so an empty /voices still reads healthy while a dead app does
+    # not — and note what this gate cannot see: the engine publishes no port on
+    # purpose, so an engine that is down shows up in the /health payload and in
+    # the first synthesis, never here.
+    wait_container_healthy frank-tts 120
+}
+
 deploy_comfyui() {
     # Build first: the unit's Image= resolves against local storage, so the
     # image has to exist before the generator starts a container from it.
@@ -1748,6 +1793,7 @@ deploy_service() {
         frank-zealot) deploy_llm_zealot ;;
         frank-archon) deploy_llm_archon ;;
         frank-tts-engine) deploy_frank_tts_engine ;;
+        frank-tts) deploy_frank_tts ;;
         hermes|hermes-dashboard|hermes-webui) deploy_hermes ;;
         romm|romm-mariadb|romm-redis|mariadb|redis) deploy_romm_stack "$service" ;;
         jellyfin) deploy_jellyfin ;;

scripts/deploy.sh

@@ -142,7 +142,7 @@ valid_service() {
         dankclaw:node-exporter|dankclaw:authentik-postgres|dankclaw:authentik-server|\
         dankclaw:authentik-worker|dankclaw:authentik-outpost|dankclaw:authentik-outpost-ldap|dankclaw:anubis|dankclaw:seerr|\
         dankclaw:open-notebook|\
-        dankclaw:frank-tts-engine|\
+        dankclaw:frank-tts-engine|dankclaw:frank-tts|\
         dankclaw:frank-dragoon|dankclaw:frank-zealot|\
         dankserver:romm-mariadb|dankserver:romm-redis|dankserver:romm|\
         dankserver:copyparty|dankserver:jellyfin|dankserver:calibre-web|dankserver:calibre-server|dankserver:plex|dankserver:tautulli|\

scripts/frank-tts.env

@@ -30,21 +30,30 @@
 #
 # BACKEND SWITCH. TTS_BACKEND picks the shape and nothing else changes for the
 # consumer:
-#   omni-http      forward to an OpenAI-shaped upstream on the host (:8880),
-#                  carrying the voice along as base64 reference_audio. The
-#                  engine does the inference; the shim resolves the voice and
-#                  re-encodes to mp3 when asked.
+#   omni-http      forward to an OpenAI-shaped upstream, carrying the voice along
+#                  as base64 reference_audio. The engine does the inference; the
+#                  shim resolves the voice and re-encodes to mp3 when asked. The
+#                  shipped engine (frank-tts-engine) speaks a voice it has
+#                  REGISTERED on itself, from the same /home/dank/voices packs,
+#                  and warms them at boot — see [[Frank TTS Engine]] for why an
+#                  unwarmed voice costs the first caller 5.5 s.
 #   llama-tts-cli  run LLAMA_TTS_BIN once per request with
 #                  --tts-speaker-file <reference.wav>, nice 19 so a narration
 #                  never starves the text endpoints on this box. Needs
 #                  LLAMA_TTS_BIN + LLAMA_TTS_MODEL filled in; LLAMA_TTS_MMPROJ
 #                  only if that binary takes a projector.
-# The upstream address is host.containers.internal — the gateway name a bridge
-# container uses for the host. It is NOT the LAN IP and it is NOT
-# 127.0.0.1: a bridge netns has neither.
+
+# THE UPSTREAM ADDRESS. The engine is a container on the private bridge this
+# unit also joins (dankclaw/voiceservice/quadlet/frank-tts-engine.network), so
+# this is its container DNS name. It used to read
+# `http://host.containers.internal:8880`, which is a shape that cannot work: a
+# bridge container reaches the host's network namespace, netavark DNATs PUBLISHED
+# ports only, and an engine on the host's loopback is published to nobody
+# ([[Container Network Namespaces]] — the trap that 502'd hermes). Inert under
+# TTS_BACKEND=llama-tts-cli, which needs no upstream at all.
 VOICES_DIR=/voices
 TTS_BACKEND=omni-http
-TTS_UPSTREAM=http://host.containers.internal:8880
+TTS_UPSTREAM=http://frank-tts-engine:8880
 TTS_UPSTREAM_MODEL=voxcpm2
 
 # CLI-backend knobs, inert while TTS_BACKEND=omni-http. Empty means "not

serverAppConfigs-docs/Dankclaw/Frank TTS Engine.md

@@ -81,7 +81,7 @@ The packs themselves are host state at `/home/dank/voices/<name>/reference.wav`
 
 ## Status visibility
 
-The engine is scraped by **nothing in Prometheus** and has **no homepage card**, and both are shape decisions rather than gaps. It exposes no metrics endpoint; and since it publishes no port, there is no address the host's status checker (`scripts/homepage-status.py`, which dials `host:port`) or the `dankclaw_default` Prometheus container could reach. That absence is the point of the network shape, not a cost of it (see [[Container Network Namespaces]] for the netavark rule that makes a host-loopback publish useless to a peer container anyway). Its up-state is visible in four places, and the runbook uses all of them:
+The engine is scraped by **nothing in Prometheus** and has **no homepage card**, and both are shape decisions rather than gaps. It exposes no metrics endpoint; and since it publishes no port, there is no address the host's status checker (`scripts/homepage-status.py`, which dials `host:port`) or the `dankclaw_default` Prometheus container could reach. That absence is the point of the network shape, not a cost of it (see [[Container Network Namespaces]] for the netavark rule that makes a host-loopback publish useless to a peer container anyway). The pair's public signal is the endpoint in front of it: [[Frank TTS]] carries the card and is what a consumer can dial. Its up-state is visible in four places, and the runbook uses all of them:
 
 - `systemctl --user status frank-tts-engine` — the unit, including whatever the warm hook logged on the way to `active`.
 - `podman healthcheck run frank-tts-engine` — runs the unit's own `HealthCmd` against `/health` on demand and exits non-zero when the engine does not answer. This is also what `scripts/deploy-remote.sh` gates the deploy on (`wait_container_healthy`), precisely because there is no URL to gate on.

serverAppConfigs-docs/Dankclaw/Frank TTS.md

@@ -0,0 +1,151 @@
+---
+type: reference
+description: "frank-tts is the fleet's cloned-voice speech endpoint on Dankclaw :7772 — the one voice surface consumers address, in front of frank-tts-engine; repo-owned, not yet deployed."
+tags:
+ - dankclaw
+ - tts
+ - voice
+ - quadlet
+---
+
+# Frank TTS
+
+`frank-tts` is the fleet's only speech endpoint: an OpenAI-shaped
+`POST /v1/audio/speech` on **Dankclaw :7772** that answers `voice=<name>` with
+audio in that cloned voice. Everything else in the voice stack sits behind it —
+the engine ([[Frank TTS Engine]]) publishes no port on purpose, and consumers
+never learn a path.
+
+**Nothing here is deployed.** No host was touched while this was written: no
+image built, no container started, nothing listening on 7772. That is also why
+[[Open Notebook]] cannot render a podcast episode yet — its pipeline calls this
+endpoint.
+
+| | |
+| --- | --- |
+| Host | Dankclaw (`192.168.0.143`), rootless podman, user unit `frank-tts.service` |
+| Port | **7772**, published (`PublishPort=7772:7772`); the family is 7770 dragoon, 7771 zealot, 7772 tts |
+| Routes | `GET /health`, `GET /v1/audio/voices`, `POST /v1/audio/speech`; everything else 404, and speech is POST-only |
+| Image | `localhost/franksdank/frank-tts:latest`, built from `dankclaw/voiceservice/Containerfile`, `Pull=never` |
+| Networks | `dankclaw_default` first (it owns the default route and the consumers), then `frank-tts-engine.network` (10.89.5.0/24, the bridge to the engine) |
+| Voice packs | `/home/dank/voices` mounted read-only at `/voices` — host state, never repo state |
+| Upstream | `http://frank-tts-engine:8880` (`scripts/frank-tts.env`, `TTS_UPSTREAM`) |
+| Rollback | `TTS_BACKEND=llama-tts-cli` runs a CLI binary per request and needs no upstream at all |
+
+## Naming a voice
+
+A voice **is** a directory name. `voice=narrator1` resolves to
+`/voices/narrator1/reference.wav`, and that file — not a manifest, not a config
+entry — is what makes the name real. omp's TTS device may send `voice_id`; the
+shim accepts either.
+
+The usable shape is `^[a-z0-9][a-z0-9._-]*$`: lowercase, starting with a letter
+or digit, then letters, digits, `.`, `_`, `-`, at most 64 characters. No slash,
+no `..`, no space, no uppercase. The lowercase requirement is where two rules
+meet: `app.py` would accept `[A-Za-z0-9…]`, but `tts-server` **lowercases
+names**, so a pack called `Narrator1` resolves through the façade and not
+through the engine. The boot warmer therefore refuses a mixed-case directory
+loudly instead of letting it half-work.
+
+Names are user-visible: an unknown voice comes back as
+`400 unknown voice 'x'; available voices: …`, and that list is the honest
+census. The podcast speakers are `narrator1`, `narrator2`, `narrator3` —
+[[Open Notebook]] is configured with exactly those three, so renaming them
+breaks episode rendering, not just speech. A personal voice gets the person's
+name, lowercase.
+
+## Voice packs
+
+One directory per voice under `/home/dank/voices`:
+
+```
+reference.wav    24 kHz mono PCM, 18-25 s of clean single-speaker audio
+reference.spk    engine speaker embedding (8 192 B)
+reference.rvq    reference codec codes (22 B per 12.5 Hz frame)
+manifest.json    source file, offsets, engine, sha256
+```
+
+`reference.wav` is the engine-agnostic term the façade gates on; the other two
+are what makes a voice reusable by this engine, and the pack builder produces
+them — never by hand, never fabricated from the WAV. Two laws apply to the
+source material: offsets always start **past the first 10 seconds** of the
+sample, and packs are host state that stays out of this repo. Because the
+container runs as uid 10000, files must be world-readable (`644`/`755`), and the
+directory must exist before the first deploy: rootless podman auto-creates a
+missing bind source **root-owned**, which reads as "no voices" rather than as an
+error.
+
+Adding a voice to a running stack is a two-step thing — drop the pack, then
+register **and warm** it with
+`podman exec frank-tts-engine /app/warm-voices.sh` — because registering alone
+does not warm it. The reason is the cold-voice law in [[Frank TTS Engine]], and
+the procedure with its proof (the second request under a second) is the
+`frank-tts-add-cloned-voice` skill.
+
+## Why the upstream is a container name
+
+`scripts/frank-tts.env` used to point at `http://host.containers.internal:8880`.
+That cannot work, and it is the trap this shape exists to avoid: a bridge
+container reaches the host's network namespace, netavark DNATs **published**
+ports only, and an engine on the host's loopback is published to nobody — the
+same shape that 502'd hermes ([[Container Network Namespaces]]). So both units
+attach to one committed Quadlet network and the façade dials the engine's
+container DNS name.
+
+The consequence worth stating before an operator meets it: **the engine is not
+reachable from the host at all** — not over the LAN, not over loopback. Its
+health, voice registry and logs are observable only through
+`podman exec frank-tts-engine …` and `systemctl --user status`. And the façade's
+own `/health` answers 200 with the backend name and the voice list it resolved
+without dialing the engine, so "façade healthy, engine down" is a real state: it
+shows up as a failed synthesis, never as a down probe.
+
+## Files
+
+| Path | What |
+| --- | --- |
+| `dankclaw/voiceservice/app.py` | the shim: stdlib only — resolves the voice, forwards, re-encodes mp3 |
+| `dankclaw/voiceservice/Containerfile` | python 3.12-alpine pinned by digest + ffmpeg, uid 10000 |
+| `dankclaw/voiceservice/quadlet/frank-tts.container` | the unit: two networks, `Restart=always`, `HealthCmd`, `[Install]` |
+| `dankclaw/voiceservice/quadlet/frank-tts-engine.network` | the shared bridge, named after the engine unit and attached by both |
+| `scripts/frank-tts.env` | backend, upstream, port, limits — paths and numbers, no credentials |
+| `tests/frank_tts_unit.bats` | the shim against stub engines over real sockets |
+| `tests/frank_tts_engine.bats` | the pair's wiring: generator output, planner, homepage, deployer |
+
+## Deploying it
+
+`scripts/deploy-remote.sh dankclaw frank-tts` (or `frank-tts-engine frank-tts`):
+builds the façade image, installs **both** Quadlet units — including the
+engine's `.network` file, because a referenced `Network=` file the generator
+cannot find means the façade unit is not produced at all — creates
+`/home/dank/voices` as the deploy user, restarts the unit (whose `Wants=` and
+`After=` pull the engine and its warm pass ahead of it) and gates on podman's
+recorded health. It never runs `systemctl --user enable`; boot persistence is
+the `[Install]` section in each unit. Order matters in a full deploy:
+[[Frank TTS Engine]] is planned before this, and both before [[Open Notebook]].
+
+## Not scraped, and why
+
+`shared/prometheus/` gets **no** frank-tts job, and that is a considered
+absence. The façade exports no `/metrics` — `app.py` serves `/health` plus the
+speech route only — and this Prometheus 3 install refuses non-metrics content
+types: [[Prometheus]] records that the existing HTML probes (`comfyui`, the two
+`services` targets) sit **down** with
+`received unsupported Content-Type … and no fallback_scrape_protocol specified`.
+A `/health` probe job would therefore be structurally never-green, and because
+`LlmEndpointDown` is scoped `up{job=~"frank-.*"} == 0`, a permanently red
+`frank-tts` target would page on Signal every few minutes for an endpoint that
+is fine — the frank-archon lesson pointed the other way. The engine cannot be
+scraped at all: it publishes nothing. Status lives in `systemctl --user status`,
+`podman healthcheck run`, the two unit journals, and the homepage card, which is
+gated `wip: down` until the deploy and probes `127.0.0.1:7772`.
+
+## Troubleshooting
+
+| Symptom | Cause |
+| --- | --- |
+| `400 unknown voice 'x'; available voices: …` | the name is not a pack: case, spelling, missing `reference.wav`, or an empty/root-owned `/home/dank/voices` |
+| `(none: no voice pack with a reference.wav in /voices)` | the mount, not the voices: `podman inspect frank-tts --format '{{json .Mounts}}'`, then the directory owner |
+| Endpoint answers, synthesis fails | the engine: `podman healthcheck run frank-tts-engine`, then `systemctl --user status frank-tts-engine.service` |
+| First request of the day takes ~5.5 s | the warm pass did not run — cold-voice law in [[Frank TTS Engine]] |
+| The unit never appears after a deploy | the generator dropped it: `frank-tts-engine.network` is missing from `~/.config/containers/systemd/` |

serverAppConfigs-docs/index.md

@@ -81,6 +81,7 @@ macOS mini) as quadlets inside its podman machine — not on Dankserver.
 - [[Marreta]] — content-cleaning proxy (guard-chained; shares SearXNG's Gluetun egress)
 - [[Open Notebook]] — podcast generator (scripts by frank-zealot, voices by frank-tts); repo-owned config, not deployed
 - [[Frank TTS Engine]] — the arm A TTS engine (`qwentts.cpp` resident `tts-server`, 1.7 B talker) behind frank-tts on a private bridge; repo-owned config, not deployed
+- [[Frank TTS]] — the 7772 cloned-voice endpoint consumers address: voice naming, pack layout, why the upstream is a container name; repo-owned config, not deployed
 
 ## Infrastructure
 

serverAppConfigs-docs/log.md

@@ -2490,3 +2490,49 @@ every restart since the cutover.
   nothing and exposes no metrics, so there is nothing to probe, which is said out
   loud in the page rather than papered over. No ICL/`ref_text` work: the packs
   keep `reference.spk`/`reference.rvq` so it stays a per-voice opt-in.
+
+## 2026-10-18 — frank-tts: the 7772 endpoint gets its deploy wiring, and voice naming is written down
+
+- Stage 2 of the voice stack: the **façade** in front of the engine is now a
+  deployable service too. Nothing deployed, no host touched. Runbook:
+  [[Frank TTS]].
+- **Two attached networks, in a meaningful order.** `dankclaw_default` first — it
+  owns the default route and is where consumers live (open-notebook dials
+  `http://frank-tts:7772/v1` by container name) — then the voice pair's private
+  bridge. `scripts/frank-tts.env`'s `TTS_UPSTREAM` moves from
+  `host.containers.internal:8880` to `http://frank-tts-engine:8880`, which is the
+  actual fix for a shape that could never have worked: a bridge container cannot
+  reach a host-loopback bind, and the engine publishes nothing.
+- **`Wants=` + `After=` on the engine, never `Requires=`:** the façade still
+  carries the `llama-tts-cli` rollback backend, which needs no upstream, so an
+  engine that will not boot must delay this endpoint, not take it down.
+- The façade handler installs the **engine's** quadlet pair as well. Not tidiness:
+  with a referenced `Network=` file absent, the v1 Quadlet generator produces no
+  container unit at all, and `--only frank-tts` has no other way to obtain it. It
+  also `mkdir -p /home/dank/voices` as the deploy user, because rootless podman
+  auto-creates a missing bind source **root-owned** and the endpoint then reports
+  "no voices" instead of an error.
+- **A voice is a lowercase directory name.** `^[a-z0-9][a-z0-9._-]*$`, ≤ 64 chars,
+  no slash/`..`/space. The shape is the intersection of two rules that do not
+  agree: `app.py` would accept mixed case, `tts-server` lowercases names — so a
+  pack named `Narrator1` resolves through the façade and not through the engine,
+  and the boot warmer refuses such a directory loudly. `narrator1/2/3` are
+  load-bearing for open-notebook, and `frank-tts-add-cloned-voice` is the skill
+  that walks the pack → register → warm → prove-a-second-request flow.
+- Registered everywhere the open-notebook entry named as law (planner order puts
+  the engine before the façade, so a warm registry precedes the first synthesis),
+  plus the homepage card — `wip: down` and hidden, because nothing listens on
+  7772 yet.
+- **No Prometheus job, on purpose.** The façade exports no `/metrics`, Prometheus 3
+  refuses HTML/JSON content types (the `comfyui` and `services` probes are
+  documented down for exactly that), and `LlmEndpointDown` is scoped
+  `up{job=~"frank-.*"}` — so a `/health` scrape would page on Signal every few
+  minutes for a healthy endpoint. That is the frank-archon never-green lesson
+  pointed the other way, and it is written in the page instead of being quietly
+  ignored.
+- Tests added to the voice seam: the generator's own rendering of the pair (both
+  attachments, first-network order, one publish, Wants-not-Requires), the
+  env-file upstream checked as a **network join** rather than a string
+  comparison, planner separation and order, the façade handler's steps, the
+  homepage card's gating, and routing that selects both seams for either
+  deployable's paths.

shared/homepage/img/apps/mono-ft.svg

@@ -0,0 +1 @@
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 96 96"><polygon points="48,6 86,27 86,69 48,90 10,69 10,27" fill="#101a12" stroke="#7ee787" stroke-width="3"/><text x="48" y="60" font-family="monospace" font-size="30" font-weight="bold" fill="#7ee787" text-anchor="middle">FT</text></svg>

shared/homepage/services.json

@@ -536,5 +536,18 @@
     "wip": false,
     "showLink": true,
     "art": "/img/apps/mono-cu.svg"
+  },
+  {
+    "name": "frank-tts",
+    "category": "admin",
+    "section": "AI",
+    "description": "The fleet's cloned-voice speech endpoint: POST /v1/audio/speech with voice=<name>, audio back in that voice. Public on 7772; the engine behind it (frank-tts-engine) is unpublished on purpose. Hidden until deployed.",
+    "url": "",
+    "docs": "",
+    "probe": "127.0.0.1:7772",
+    "method": "http",
+    "wip": "down",
+    "showLink": false,
+    "art": "/img/apps/mono-ft.svg"
   }
 ]

tests/frank_tts_engine.bats

@@ -20,6 +20,10 @@ load helpers
 
 UNIT="$REPO_ROOT/dankclaw/voiceservice/quadlet/frank-tts-engine.container"
 NETF="$REPO_ROOT/dankclaw/voiceservice/quadlet/frank-tts-engine.network"
+# The façade this engine serves: its wiring is tested here because the bridge
+# both units attach to is what makes the pair one deployable shape.
+FACADE="$REPO_ROOT/dankclaw/voiceservice/quadlet/frank-tts.container"
+FACADE_ENV="$REPO_ROOT/scripts/frank-tts.env"
 CF="$REPO_ROOT/dankclaw/voiceservice/Containerfile.engine"
 START="$REPO_ROOT/dankclaw/voiceservice/tts-engine-start.sh"
 ENVF="$REPO_ROOT/scripts/frank-tts-engine.env"
@@ -184,19 +188,34 @@ quadlet_generator() {
     return 1
 }
 
-# render_units — run the generator in a throwaway HOME over a copy of the two
-# source files and print everything it emits. --dryrun prints instead of
-# writing, so this neither contacts the podman daemon nor creates a network.
+# render_units — run the generator in a throwaway HOME over a copy of the voice
+# stack's source files and print everything it emits. Both units are rendered
+# together on purpose: the façade references the engine's .network, and a
+# referenced file that is not in the directory makes the generator drop that
+# container unit outright — which is the failure this seam must be able to see.
+# --dryrun prints instead of writing, so this neither contacts the podman daemon
+# nor creates a network.
 render_units() {
     local gen home
     gen="$(quadlet_generator)" || { echo "no Quadlet generator on this box"; return 1; }
     home="$TEST_TMP/fakehome"
     mkdir -p "$home/.config/containers/systemd"
-    cp "$NETF" "$UNIT" "$home/.config/containers/systemd/"
+    cp "$NETF" "$UNIT" "$FACADE" "$home/.config/containers/systemd/"
     HOME="$home" "$gen" --user --dryrun > "$TEST_TMP/generated.txt" 2> "$TEST_TMP/generated.err"
     cat "$TEST_TMP/generated.txt"
 }
 
+# unit_block <name> — one unit's block from the last render_units output. The
+# end of the block is the next `---` marker: two units are rendered now, and a
+# slice that ran to the end of the output would read the façade's RestartSec
+# into the engine's assertions, which is exactly how a generator test starts
+# asserting the wrong container.
+unit_block() {
+    awk -v u="$1" 'index($0, "---" u "---") == 1 { f = 1; next }
+                  /^---/ { f = 0 }
+                  f' "$TEST_TMP/generated.txt"
+}
+
 # free_port — an address with nothing bound to it, for the tests that need the
 # warmer to be dialing before a listener exists.
 free_port() {
@@ -251,7 +270,7 @@ s.close()'
     # Boot persistence and self-healing, as the generator actually emits them —
     # and the warm hook: ExecStartPost must carry the `-` prefix, because
     # Restart=always plus a failing warmer is a crash loop on the endpoint.
-    unit="$(printf '%s\n' "$rendered" | sed -n '/^---frank-tts-engine.service---$/,$p')"
+    unit="$(unit_block frank-tts-engine.service)"
     printf '%s' "$unit" | grep -qE '^Restart=always$'
     restart_sec="$(printf '%s' "$unit" | sed -nE 's/^RestartSec=([0-9]+)s?$/\1/p')"
     [ -n "$restart_sec" ] && [ "$restart_sec" -le 30 ]
@@ -266,12 +285,12 @@ s.close()'
 
 @test "the generator renders the bridge creation command with the pinned subnet" {
     rendered="$(render_units)" || { echo "$rendered"; skip "no Quadlet generator here"; }
-    net="$(printf '%s\n' "$rendered" | sed -n '/^---frank-tts-engine-network.service---$/,$p')"
+    net="$(unit_block frank-tts-engine-network.service)"
     printf '%s' "$net" | grep -qE '^ExecStart=/usr/bin/podman network create --ignore --driver bridge --subnet 10\.89\.5\.0/24 --gateway 10\.89\.5\.1 systemd-frank-tts-engine$'
     # The container unit must be tied to the network unit, not merely mention it:
     # a referenced .network that the generator cannot find kills the container
     # unit outright, and an untied one starts the container before the bridge.
-    unit="$(printf '%s\n' "$rendered" | sed -n '/^---frank-tts-engine.service---$/,$p')"
+    unit="$(unit_block frank-tts-engine.service)"
     printf '%s' "$unit" | grep -qE '^Requires=frank-tts-engine-network\.service$'
     printf '%s' "$unit" | grep -qE '^After=frank-tts-engine-network\.service$'
 }
@@ -562,9 +581,11 @@ PY
 }
 
 @test "the planner maps every engine path to frank-tts-engine, and nothing to dankserver" {
+    # Everything named after the engine, EXCEPT the bridge file: both units
+    # attach to it, so a subnet change is a change to two deployables and that
+    # pairing is asserted in the façade's planner test below.
     run python3 "$PLANNER" --target dankclaw --paths \
         dankclaw/voiceservice/quadlet/frank-tts-engine.container \
-        dankclaw/voiceservice/quadlet/frank-tts-engine.network \
         dankclaw/voiceservice/Containerfile.engine \
         dankclaw/voiceservice/tts-engine-start.sh \
         scripts/frank-tts-engine.env \
@@ -654,3 +675,141 @@ PY
         fi
     done
 }
+
+@test "the generator puts the façade on both bridges and behind the engine" {
+    rendered="$(render_units)" || { echo "$rendered"; skip "no Quadlet generator here"; }
+    line="$(printf '%s\n' "$rendered" | grep -E '^ExecStart=/usr/bin/podman run .*--name frank-tts ')"
+    [ -n "$line" ] || { printf '%s\n' "$rendered"; false; }
+
+    # Two attachments, and the fleet-wide bridge FIRST: that is the network
+    # consumers address (open-notebook dials `http://frank-tts:7772/v1` by
+    # container name), so it owns the default route. The engine's private bridge
+    # is second and exists so the shim can resolve the engine at all.
+    [ "$(printf '%s' "$line" | grep -oE -- '--network [^ ]+' | head -1)" = "--network dankclaw_default" ]
+    printf '%s' "$line" | grep -qE -- '--network systemd-frank-tts-engine( |$)'
+    # Published exactly once, on the fleet port — and this is the only publish in
+    # the voice stack.
+    [ "$(printf '%s' "$line" | grep -oE -- '--publish [^ ]+' | wc -l)" = "1" ]
+    printf '%s' "$line" | grep -qE -- '--publish (\[::\]:)?7772:7772( |$)'
+
+    unit="$(unit_block frank-tts.service)"
+    printf '%s' "$unit" | grep -qE '^Wants=frank-tts-engine\.service$'
+    printf '%s' "$unit" | grep -qE '^After=.*frank-tts-engine\.service'
+    # Wants, never Requires: the CLI rollback backend needs no upstream, and an
+    # engine that will not start must not take this endpoint's unit down.
+    ! printf '%s' "$unit" | grep -qE '^Requires=frank-tts-engine\.service$'
+    # And it is tied to the bridge as well, or the container would be started
+    # before netavark had created the network it dials over.
+    printf '%s' "$unit" | grep -qE '^Requires=frank-tts-engine-network\.service$'
+}
+
+@test "the upstream the env file names is only resolvable on a network the unit joins" {
+    # The pair's one real wiring contract, checked as a join rather than as a
+    # string: take the hostname out of TTS_UPSTREAM the way the container will
+    # get it, and require the façade unit to attach to the Quadlet network file
+    # named after that hostname. A revert to host.containers.internal, or a unit
+    # that drops the second Network= line, breaks here — both mistakes leave the
+    # endpoint answering and every synthesis failing.
+    set -a
+    # shellcheck disable=SC1090
+    source "$FACADE_ENV"
+    set +a
+    host="${TTS_UPSTREAM#*://}"
+    host="${host%%:*}"
+    host="${host%%/*}"
+    [ -n "$host" ] || { echo "TTS_UPSTREAM names no host: $TTS_UPSTREAM"; false; }
+    [ "$host" != localhost ] || { echo "localhost is not reachable across netns"; false; }
+    if ! grep -qE "^Network=${host}\.network$" "$FACADE"; then
+        echo "frank-tts.container does not attach to ${host}.network"
+        false
+    fi
+    if ! [ -f "$REPO_ROOT/dankclaw/voiceservice/quadlet/${host}.network" ]; then
+        echo "no Quadlet network file for $host — the generator would drop the unit"
+        false
+    fi
+}
+
+@test "the planner keeps the two voice deployables separate and ordered" {
+    # `--only` on the façade must not drag the engine's rebuild along, and a
+    # bridge change must restart both: the network file is named after the engine
+    # unit only because install_quadlet copies `$unit.network` beside the unit.
+    run python3 "$PLANNER" --target dankclaw --paths dankclaw/voiceservice/app.py
+    [ "$output" = "frank-tts" ]
+    run python3 "$PLANNER" --target dankclaw --paths dankclaw/voiceservice/Containerfile
+    [ "$output" = "frank-tts" ]
+    run python3 "$PLANNER" --target dankclaw --paths \
+        dankclaw/voiceservice/quadlet/frank-tts.container
+    [ "$output" = "frank-tts" ]
+    run python3 "$PLANNER" --target dankclaw --paths \
+        dankclaw/voiceservice/quadlet/frank-tts-engine.container
+    [ "$output" = "frank-tts-engine" ]
+    run python3 "$PLANNER" --target dankclaw --paths \
+        dankclaw/voiceservice/quadlet/frank-tts-engine.network
+    printf '%s\n' "$output" | grep -qx frank-tts
+    printf '%s\n' "$output" | grep -qx frank-tts-engine
+
+    # Order: dependency before consumer, so a full dankclaw deploy starts a warm
+    # engine and then the endpoint that forwards into it.
+    run python3 "$PLANNER" --target dankclaw --paths \
+        dankclaw/voiceservice/quadlet/frank-tts.container \
+        dankclaw/voiceservice/quadlet/frank-tts-engine.container
+    local e f
+    e="$(printf '%s\n' "$output" | grep -n '^frank-tts-engine$' | cut -d: -f1)"
+    f="$(printf '%s\n' "$output" | grep -n '^frank-tts$' | cut -d: -f1)"
+    [ -n "$e" ] && [ -n "$f" ] && [ "$e" -lt "$f" ]
+}
+
+@test "the façade handler builds its image, installs the bridge file, and gates on recorded health" {
+    grep -qF 'dankclaw:frank-tts|' "$REMOTE"
+    grep -qF 'dankclaw:frank-tts|' "$REPO_ROOT/scripts/deploy.sh"
+    grep -qF 'frank-tts) deploy_frank_tts ;;' "$REMOTE"
+    # build_compose_image's default arm returns 0 without building: an unlisted
+    # service means a unit whose Pull=never image was never made.
+    grep -qE '^\s+containerfile=dankclaw/voiceservice/Containerfile$' "$REMOTE"
+
+    handler="$(sed -n '/^deploy_frank_tts()/,/^}/p' "$REMOTE")"
+    [ -n "$handler" ] || { echo "no deploy_frank_tts handler"; false; }
+    printf '%s' "$handler" | grep -qF 'build_compose_image frank-tts'
+    printf '%s' "$handler" | grep -qF 'install_quadlet frank-tts dankclaw/voiceservice/quadlet frank-tts'
+    # The engine's quadlet pair is installed by this handler too: with the
+    # referenced .network file missing the generator produces no façade unit at
+    # all, and `--only frank-tts` has no other way to get it onto the host.
+    printf '%s' "$handler" | grep -qF 'install_quadlet frank-tts-engine dankclaw/voiceservice/quadlet frank-tts-engine'
+    printf '%s' "$handler" | grep -qE 'mkdir -p /home/dank/voices'
+    printf '%s' "$handler" | grep -qE 'systemctl --user restart frank-tts\.service'
+    printf '%s' "$handler" | grep -qE 'wait_container_healthy frank-tts [0-9]+'
+    ! printf '%s' "$handler" | grep -qE '^[[:space:]]*systemctl --user enable'
+}
+
+@test "the voice stack's homepage state: one card for the pair, and it is hidden while undeployed" {
+    # The engine is not on the homepage and must not be: it publishes no port, so
+    # there is no address the checker could dial, and a card that can never be
+    # green is worse than no card. The façade carries the pair's signal.
+    python3 - "$REPO_ROOT" <<'PY'
+import json, os, sys
+root = sys.argv[1]
+cards = {c["name"]: c for c in json.load(open(f"{root}/shared/homepage/services.json"))}
+assert "frank-tts-engine" not in cards, \
+    "the engine publishes no port: a card for it could never be probed green"
+fts = cards["frank-tts"]
+assert fts["probe"] == "127.0.0.1:7772", fts["probe"]
+assert fts["wip"] == "down" and fts["showLink"] is False, \
+    "nothing listens on 7772 until the deploy, so a visible card reads as down forever"
+assert os.path.exists(f"{root}/shared/homepage{fts['art']}"), f"missing art {fts['art']}"
+PY
+}
+
+@test "either deployable's paths select both voice seams" {
+    # A change to the bridge or the env file can break the other half of the
+    # pair, and the seams are cheap; routing them together is what keeps a
+    # façade-only commit from landing without the engine's wiring tests.
+    run "$REPO_ROOT/scripts/test-changed.sh" --list --paths \
+        dankclaw/voiceservice/quadlet/frank-tts.container
+    [ "$status" -eq 0 ]
+    printf '%s\n' "$output" | grep -qx "tests/frank_tts_unit.bats"
+    printf '%s\n' "$output" | grep -qx "tests/frank_tts_engine.bats"
+
+    run "$REPO_ROOT/scripts/test-changed.sh" --list --paths dankclaw/voiceservice/app.py
+    [ "$status" -eq 0 ]
+    printf '%s\n' "$output" | grep -qx "tests/frank_tts_unit.bats"
+}