diff --git a/llm/scripts/deploy.sh b/llm/scripts/deploy.sh
deleted file mode 100755
index 6e8ae69..0000000
--- a/llm/scripts/deploy.sh
+++ /dev/null
@@ -1,167 +0,0 @@
-#!/usr/bin/env bash
-# deploy.sh - Deploy the vllmScripts repo to a target and restart its service.
-#
-# This script implements the second half of the git deployment workflow from
-# AGENTS.md. It assumes the local changes are committed and pushed, then:
-#   1. Pulls the repo on the target
-#   2. Symlinks the systemd unit
-#   3. Reloads systemd and restarts the service
-#   4. Waits for the health endpoint and reports status
-#
-# Sudo: set FRANK_SUDO_PW so remote sudo reads the password from stdin
-# (`sudo -S`). The passwordless restart helpers installed for the retired
-# topology are obsolete and must not be used.
-#
-# Usage:
-#   ./deploy.sh <target> [--dry-run]
-#   FRANK_SUDO_PW=... ./deploy.sh <target>
-#
-# Targets (2026-08-18 topology):
-#   dankserver - llama.cpp Qwen3.6-35B-A3B Q6_K_P (frank-default-small.service, port 7770)
-#   dankclaw   - CIRU ROCmFPX llama.cpp Qwen3.8-27B (frank-default-large.service, port 52625)
-set -euo pipefail
-
-# ---------------------------------------------------------------------------
-# Target configuration
-# ---------------------------------------------------------------------------
-declare -A REMOTE_USER REMOTE_HOST REMOTE_DIR SERVICE SERVICE_HEALTH DROP_CACHES HEALTH_WAIT
-
-REMOTE_USER[dankserver]=dank
-REMOTE_HOST[dankserver]=dankserver
-REMOTE_DIR[dankserver]="/home/dank/vLLM"
-SERVICE[dankserver]="frank-default-small"
-SERVICE_HEALTH[dankserver]="http://127.0.0.1:7770/health"
-DROP_CACHES[dankserver]=0
-# Cold load: --no-mmap reads the 30.6 GB Q6_K_P through RAM (MoE experts on
-# CPU); allow 20 minutes.
-HEALTH_WAIT[dankserver]=600
-
-REMOTE_USER[dankclaw]=dank
-REMOTE_HOST[dankclaw]=dankclaw
-REMOTE_DIR[dankclaw]="/home/dank/vllmScripts"
-SERVICE[dankclaw]="frank-default-large"
-SERVICE_HEALTH[dankclaw]="http://127.0.0.1:52625/health"
-DROP_CACHES[dankclaw]=0
-# CIRU llama.cpp (ROCm 7.15) loads the v3 five-file payload (GGUF + FFN +
-# GDN + Output-K8 .pfs + mmproj, ~36.7 GiB) + MTP draft/Output-K8 proxy and
-# initializes PromptForge views; allow 20 minutes.
-HEALTH_WAIT[dankclaw]=600
-
-TARGET="${1:-}"
-DRY_RUN=0
-if [ "${2:-}" = "--dry-run" ]; then
-    DRY_RUN=1
-fi
-
-# ---------------------------------------------------------------------------
-# Validation
-# ---------------------------------------------------------------------------
-if [ -z "${TARGET:-}" ]; then
-    echo "Usage: $0 <dankserver|dankclaw> [--dry-run]"
-    exit 1
-fi
-if [ -z "${REMOTE_HOST[$TARGET]:-}" ]; then
-    echo "Unknown target: $TARGET"
-    exit 1
-fi
-
-# ---------------------------------------------------------------------------
-# Sudo wrapper (headless-friendly)
-# ---------------------------------------------------------------------------
-SUDO_PREFIX="sudo"
-if [ -n "${FRANK_SUDO_PW:-}" ]; then
-    SUDO_PREFIX="printf '%s\n' '$FRANK_SUDO_PW' | sudo -S"
-fi
-
-# ---------------------------------------------------------------------------
-# Local checks (pre-flight)
-# ---------------------------------------------------------------------------
-cd "$(dirname "$0")/.."
-if ! git diff --quiet HEAD; then
-    echo "FAIL: Local working tree has uncommitted changes."
-    echo "Commit or stash them before deploying."
-    exit 1
-fi
-if [ "$(git rev-parse --abbrev-ref HEAD)" != "main" ]; then
-    echo "WARN: Not on 'main'; deploying a non-main branch."
-fi
-
-echo "=== Deploying to ${TARGET} ==="
-echo "  host:    ${REMOTE_HOST[$TARGET]}"
-echo "  dir:     ${REMOTE_DIR[$TARGET]}"
-echo "  service: ${SERVICE[$TARGET]}"
-echo "  health:  ${SERVICE_HEALTH[$TARGET]}"
-echo ""
-
-# ---------------------------------------------------------------------------
-# Push (unless dry-run)
-# ---------------------------------------------------------------------------
-if [ "$DRY_RUN" = "1" ]; then
-    echo "[dry-run] Would push local main to origin"
-    echo "[dry-run] Would SSH to ${REMOTE_HOST[$TARGET]} and git pull"
-else
-    echo "[1/4] Pushing local main to origin..."
-    git push origin main
-fi
-
-REMOTE="$(
-    printf '%s@%s' "${REMOTE_USER[$TARGET]}" "${REMOTE_HOST[$TARGET]}"
-)"
-
-# ---------------------------------------------------------------------------
-# Remote: pull + install + restart
-# ---------------------------------------------------------------------------
-DROP_CACHES_CMD=""
-if [ "${DROP_CACHES[$TARGET]}" = "1" ]; then
-    DROP_CACHES_CMD="
-echo 'Dropping page caches for reliable model load...'
-${SUDO_PREFIX} sh -c 'sync; echo 3 > /proc/sys/vm/drop_caches'
-"
-fi
-
-REMOTE_SCRIPT="
-set -euo pipefail
-cd '${REMOTE_DIR[$TARGET]}'
-
-echo '[2/4] Pulling repo on ${TARGET}...'
-git pull origin main
-
-echo '[3/4] Symlink unit and restart ${SERVICE[$TARGET]}...'
-${SUDO_PREFIX} ln -sf '${REMOTE_DIR[$TARGET]}/scripts/${SERVICE[$TARGET]}.service' /etc/systemd/system/${SERVICE[$TARGET]}.service
-${DROP_CACHES_CMD}
-${SUDO_PREFIX} systemctl daemon-reload
-${SUDO_PREFIX} systemctl enable '${SERVICE[$TARGET]}'
-${SUDO_PREFIX} systemctl restart '${SERVICE[$TARGET]}'
-"
-
-if [ "$DRY_RUN" = "1" ]; then
-    echo "[dry-run] Remote commands would run:"
-    echo "$REMOTE_SCRIPT"
-else
-    # shellcheck disable=SC2087
-    ssh "$REMOTE" bash -s <<REMOTE_EOF
-${REMOTE_SCRIPT}
-REMOTE_EOF
-fi
-
-# ---------------------------------------------------------------------------
-# Health check
-# ---------------------------------------------------------------------------
-if [ "$DRY_RUN" = "1" ]; then
-    echo "[dry-run] Would wait for health at ${SERVICE_HEALTH[$TARGET]}"
-else
-    echo "[4/4] Waiting for health endpoint ${SERVICE_HEALTH[$TARGET]} (via ssh)..."
-    HEALTH_URL="${SERVICE_HEALTH[$TARGET]}"
-    HEALTH_ITERS="${HEALTH_WAIT[$TARGET]:-300}"
-    for i in $(seq 1 "$HEALTH_ITERS"); do
-        if ssh "$REMOTE" "curl -sf '$HEALTH_URL'" > /dev/null 2>&1; then
-            echo "  Service healthy after approx $((i * 2))s"
-            echo ""
-            echo "=== Deploy complete: ${TARGET} ==="
-            exit 0
-        fi
-        sleep 2
-    done
-    echo "FAIL: Service did not become healthy in $((HEALTH_ITERS * 2))s"
-    exit 1
-fi
diff --git a/llm/scripts/bench-fast-greedy.sh b/scripts/bench-fast-greedy.sh
similarity index 100%
rename from llm/scripts/bench-fast-greedy.sh
rename to scripts/bench-fast-greedy.sh
diff --git a/llm/scripts/bench-kairic-ab.sh b/scripts/bench-kairic-ab.sh
similarity index 100%
rename from llm/scripts/bench-kairic-ab.sh
rename to scripts/bench-kairic-ab.sh
diff --git a/llm/scripts/bench-spec-stack.sh b/scripts/bench-spec-stack.sh
old mode 100644
new mode 100755
similarity index 100%
rename from llm/scripts/bench-spec-stack.sh
rename to scripts/bench-spec-stack.sh
diff --git a/llm/scripts/frank-default-large.env b/scripts/frank-default-large.env
similarity index 100%
rename from llm/scripts/frank-default-large.env
rename to scripts/frank-default-large.env
diff --git a/llm/scripts/frank-default-large.service b/scripts/frank-default-large.service
similarity index 100%
rename from llm/scripts/frank-default-large.service
rename to scripts/frank-default-large.service
diff --git a/llm/scripts/frank-default-npu.env b/scripts/frank-default-npu.env
similarity index 100%
rename from llm/scripts/frank-default-npu.env
rename to scripts/frank-default-npu.env
diff --git a/llm/scripts/frank-default-npu.service b/scripts/frank-default-npu.service
similarity index 100%
rename from llm/scripts/frank-default-npu.service
rename to scripts/frank-default-npu.service
diff --git a/llm/scripts/frank-default-small.env b/scripts/frank-default-small.env
similarity index 100%
rename from llm/scripts/frank-default-small.env
rename to scripts/frank-default-small.env
diff --git a/llm/scripts/frank-default-small.service b/scripts/frank-default-small.service
similarity index 100%
rename from llm/scripts/frank-default-small.service
rename to scripts/frank-default-small.service
diff --git a/llm/scripts/serve-frank-default-npu.sh b/scripts/serve-frank-default-npu.sh
similarity index 100%
rename from llm/scripts/serve-frank-default-npu.sh
rename to scripts/serve-frank-default-npu.sh
diff --git a/llm/scripts/serve-frank-large.sh b/scripts/serve-frank-large.sh
similarity index 100%
rename from llm/scripts/serve-frank-large.sh
rename to scripts/serve-frank-large.sh
diff --git a/llm/scripts/serve-frank-small.sh b/scripts/serve-frank-small.sh
similarity index 100%
rename from llm/scripts/serve-frank-small.sh
rename to scripts/serve-frank-small.sh